bellett.net
https://bellett.net/forums/

mrflibbles gets a bellett
https://bellett.net/forums/viewtopic.php?f=13&t=1079
Page 1 of 4

Author:  mrflibbles [ Mon Oct 04, 2010 10:46 am ]
Post subject:  mrflibbles gets a bellett

Well after having last owned a bellett back in the early 90's (that was before i got my florian fetish!) i am finally the proud owner of another bellett! A couple of you know the story of this car, found in a paddock. The beast found its way up into my driveway. Anyway After having recieved some tlc in the form of a tune up and a few other little bits she is nearly ready to hit the road! and yes she is registered im just waiting to get another two tyres for my ebay "special" rims! and a couple of other small things then she is good to go...... for now!
Image
Image
Image
Image
Image
can you guess what the centre cap is from?
plans are... possibly finish getting my fat 13" rims on her, lower the front and drive! (disclaimer: these plans may vary)

Author:  degruch [ Mon Oct 04, 2010 11:28 am ]
Post subject:  Re: mrflibbles gets a bellett

Nice li'l rig, congrats! Will look great slammed with those rims on it.

Author:  RobSA [ Mon Oct 04, 2010 12:59 pm ]
Post subject:  Re: mrflibbles gets a bellett

Great to see the Beast up and running, welcome to the world of Belletts

:lol: :D

Cheers
Rob

Author:  oz_toffa [ Wed Oct 06, 2010 9:54 am ]
Post subject:  Re: mrflibbles gets a bellett

The sound of a 1500cc Rat Bellett echos thru Mt Barker once again. Look forward to seeing her on the road and joining in our car runs. Flibbleesss once again.

Author:  Barney [ Thu Oct 07, 2010 4:05 am ]
Post subject:  Re: mrflibbles gets a bellett

Very cool starting point! Love the rat look.

These small cars make 15" wheels look HUGE, perhaps won't look as out of proportion if it was lowered.

Looking forward to future updates :)

Author:  mrflibbles [ Thu Oct 07, 2010 8:55 am ]
Post subject:  Re: mrflibbles gets a bellett

plan is to lower it a little (those that know me know that my little is a little bit bigger than most!) just waiting to get 2 more tyres for her and finish the front indicators then ill look at ride hieghts etc.
anyone in adelaide got an old surfboard they no longer want?

Author:  GTtoo [ Thu Oct 07, 2010 11:01 pm ]
Post subject:  Re: mrflibbles gets a bellett

Congrats dude, a long time coming. And another Rat too !! Will be great to see you on the cruises. ( the squadron grows !)

B.

Author:  dave [ Thu Oct 14, 2010 10:25 am ]
Post subject:  Re: mrflibbles gets a bellett

Ratter face-off!

Author:  mrflibbles [ Wed Nov 03, 2010 8:46 am ]
Post subject:  Re: mrflibbles gets a bellett

Well took the bellett for its first officially registered drive today, to work! Drove really well. The reception at work was everything from "the dumps further down the road" to "thats cool when you getting a surfboard to put on the roof racks!" I figure a bit more work to the car with things like a battery clamp, come shocks, rack mounts etc shell be a good goer!

Author:  gt orphanage [ Wed Nov 03, 2010 9:28 am ]
Post subject:  Re: mrflibbles gets a bellett

49.5 weeks to coona ;).your half way there.

Author:  mrflibbles [ Wed Nov 03, 2010 9:57 am ]
Post subject:  Re: mrflibbles gets a bellett

lol would love to be at the next one! i better pull my finger out!

Author:  mrflibbles [ Thu Nov 04, 2010 2:45 am ]
Post subject:  Re: mrflibbles gets a bellett

more interesting news, came back to work today to see a guy taking pics of my bellett. Stopped to ask him why and he says the he thinks this was once his car back when it was near new, seems to think the plates are the same and that it once was a nice shiny reddy colour with a lovely bone interior! Anyway he mentioned he had pictures of it when he had it, so i asked for a copy of the pics when he digs them out. Friendly older guy was loving that he has seen the car again, and that its local to him too!

Author:  2ldohc [ Thu Nov 04, 2010 3:54 am ]
Post subject:  Re: mrflibbles gets a bellett

That would be great to have some history on the car and know where it was for at least part of it's life!

Keep us updated and if you're interested in selling those wheels I might know someone who will take them :P

Cheers,
R.

Author:  yellowperil [ Thu Nov 04, 2010 5:58 am ]
Post subject:  Re: mrflibbles gets a bellett

Congratulations
A great save. It's heart-wrenching to see them slowly decaying in a paddock (not suggesting that this fine example is anywhere near that!!)

On another matter, do I take it from Gt Orpahange's post above that Coona is always the location for the nationals and that it is always in late October?

Author:  rod [ Thu Nov 04, 2010 6:03 am ]
Post subject:  Re: mrflibbles gets a bellett

no yellowperr its in coona 2011 then i believe its in either caberra or bega 2012 ? cheers rod tassie ps if i ccan make it u can ?

Author:  A.J. [ Thu Nov 04, 2010 7:23 am ]
Post subject:  Re: mrflibbles gets a bellett

mrfibbles,
You mention that you need/want some rack mounts. I have some new ones in the shed if you want then soonish. I'm sure we can come to some arrangement if you are interested.
A.J.

Author:  oz_toffa [ Thu Nov 04, 2010 10:48 am ]
Post subject:  Re: mrflibbles gets a bellett

Yes GTtoo and others. Another Bellett to do the great Adelaide hills cruzes.
the numbers are not growing as yet with RobSA Ratter in the shed for some extensive repairs so he will be co-piloting for a while.
But slowly and surely we will get the numbers up and the hills will echo with the sound of isuzu engines climbing the winding roads.

Wahhooooooo!!

Chris

Author:  mrflibbles [ Thu Nov 04, 2010 11:01 am ]
Post subject:  Re: mrflibbles gets a bellett

AJ thanks for the offer, but i have a few things to do before i get to the rack mounts, among them fixing dead windscreen wipers and headlights....
she drives well and you really cant pick the mounts are stuffed, but you can pick that one of the rear shocks is definately well and truly stuffed!

Author:  oz_toffa [ Thu Nov 04, 2010 11:29 am ]
Post subject:  Re: mrflibbles gets a bellett

wipers and headlights are usually fuse box related. Get some fine wet and dry and wrap it aroung a phillips screw driver and run it back and forth thru the inside of the fuse connectors. be careful as the metal connector strips can be incline to bend and then you may have one break as you re-tension it back into its original position.
All good fun...

Author:  mrflibbles [ Fri Nov 05, 2010 2:51 am ]
Post subject:  Re: mrflibbles gets a bellett

thanks Chris, just what i was planning on doing really! fingers crossed nothing breaks or ill be on your doorstep!

Page 1 of 4 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/