View unanswered posts | View active topics It is currently Thu Mar 28, 2024 6:49 pm



Reply to topic  [ 16 posts ] 
Suspension bushes 
Author Message
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
Does anybody know or have aprt to measure, I am after the dimensions of the upper front wishbone bush

I 'think' it has a pressed in metal tube also. But if i have the basic dimensions i can look for something to replace it or perhaps turn up a new one.

Nolathane have a zillion bushes but finding right one is proving hard with out dimensions.

glenn

_________________
'72 PR60 Sport


Sun Dec 20, 2015 11:30 pm
Profile WWW

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
Hi Glenn,
. I have recently been able to get my bushes out, so will be able to measure them for you. They do have a steel shell, and a crush tube. I will be getting new ones made up in the new year out of urethane, but I think they will be reusing the old crush tube. I will have the moulds then,should any more be needed, but would need to sort out the crush tubes.


Mon Dec 21, 2015 7:45 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
67GT wrote:
Hi Glenn,
. I have recently been able to get my bushes out, so will be able to measure them for you. They do have a steel shell, and a crush tube. I will be getting new ones made up in the new year out of urethane, but I think they will be reusing the old crush tube. I will have the moulds then,should any more be needed, but would need to sort out the crush tubes.


Thanks, that will be great if you can measure for me.

Nolathane list many sized bushes (all dimensions shown) and I was hoping to find something suitable.

I take it from what you say there is an inner and outer metal tube ? Perhaps you could take some pics also when you remove them. Main interest in top bush.

glenn

_________________
'72 PR60 Sport


Mon Dec 21, 2015 7:56 am
Profile WWW

Joined: Mon Jan 05, 2009 10:39 am
Posts: 1136
Location: Adelaide Hills
Car(s): GU Patrol, AU ute, 1969 florian deluxe, 1976 Luv & 1980 KB 4x4 isuzu
Reply with quote
I have an upper and lower arm out of a car that I measured up, nolathane had a few that were close, but would require different size centre sleeves. I think for one of the arms (probably upper) the rodeo shackle bushes were fairly similar in size.

_________________
I am "that" Florian guy.
never buy a car you cant push.


Mon Dec 21, 2015 9:40 am
Profile

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
I have been through all the listings, and the only options require quite a few modifications. I will measure them tomorrow at work and let you know.


Mon Dec 21, 2015 11:21 am
Profile

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
ok front upper arm bushes----shell o.d. 36mm, shell flange 44mm. Total length of crush tube 41mm, i.d. of crush tube 12mm. ( o.d. of crush tube app.18mm)
lower arm bushes---- shell o.d. 32mm, shell flange 44.75mm. Total length 52mm. Crush tube i.d. 16mm (o.d. 20mm )
rear arm bushes -----shell o.d. 34mm, shell flange 51.5mm. Total length 84mm. crush tube i.d. 14mm (o.d. 20mm app.)
Now these measurements are taken from the used bushes removed from the arms of my 67GT., using a set of manual verniers. They are as accurate as I can provide, but if anyone has new bushes to measure, please do.
Cheers, Warren.


Mon Dec 21, 2015 8:49 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
67GT wrote:
ok front upper arm bushes----shell o.d. 36mm, shell flange 44mm. Total length of crush tube 41mm, i.d. of crush tube 12mm. ( o.d. of crush tube app.18mm)
lower arm bushes---- shell o.d. 32mm, shell flange 44.75mm. Total length 52mm. Crush tube i.d. 16mm (o.d. 20mm )
rear arm bushes -----shell o.d. 34mm, shell flange 51.5mm. Total length 84mm. crush tube i.d. 14mm (o.d. 20mm app.)
Now these measurements are taken from the used bushes removed from the arms of my 67GT., using a set of manual verniers. They are as accurate as I can provide, but if anyone has new bushes to measure, please do.
Cheers, Warren.

Many thanks. Gives me an idea on what to look for.

Note comments also of nothing in catalogs. Alternative is to machine up new stuff of course.

is there an outer metal tube also or just the metal of the arm itself?

_________________
'72 PR60 Sport


Last edited by Glenn on Tue Dec 22, 2015 12:25 am, edited 1 time in total.



Mon Dec 21, 2015 8:56 pm
Profile WWW
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
is this how your measurements come out (upper only)

[angle lines are the bush material itself]

later edit: changed picture


Attachments:
upper wishbone bush maybe.jpg
upper wishbone bush maybe.jpg [ 47.42 KiB | Viewed 29749 times ]

_________________
'72 PR60 Sport


Last edited by Glenn on Tue Dec 22, 2015 1:12 am, edited 2 times in total.

Mon Dec 21, 2015 9:38 pm
Profile WWW

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
Your top and bottom red lines don't exist along the length of the bush, just across one end, but otherwise looks good.


Mon Dec 21, 2015 10:26 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
67GT wrote:
Your top and bottom red lines don't exist along the length of the bush, just across one end, but otherwise looks good.

yes, i realised that after posting the drawing

are there 2 per pivot?

_________________
'72 PR60 Sport


Tue Dec 22, 2015 12:14 am
Profile WWW

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
Ok revised drawing looks good. Two bushes per arm.


Tue Dec 22, 2015 12:58 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
this looks close.....although crush tube would need to be re-made
and one end would need to altered

http://www.nolathane.com.au/product_detail.php?part_number=48093

_________________
'72 PR60 Sport


Tue Dec 22, 2015 5:47 am
Profile WWW
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
some good stuff here on making your own bushes. Not sure where you can get urethane rod though?

http://elantrikbits.com/lotus-elan-blog/urethane-suspension-bushes/

_________________
'72 PR60 Sport


Tue Dec 22, 2015 6:28 am
Profile WWW

Joined: Mon Jan 05, 2009 10:39 am
Posts: 1136
Location: Adelaide Hills
Car(s): GU Patrol, AU ute, 1969 florian deluxe, 1976 Luv & 1980 KB 4x4 isuzu
Reply with quote
used to be able to buy several different duros of urethane rod from Nolathane/Pedders (red ranger), and possibly from fulcrum. haven't seen any for a while though, so I may be out of date with my info.

_________________
I am "that" Florian guy.
never buy a car you cant push.


Tue Dec 22, 2015 7:54 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
mrflibbles wrote:
used to be able to buy several different duros of urethane rod from Nolathane/Pedders (red ranger), and possibly from fulcrum. haven't seen any for a while though, so I may be out of date with my info.

thanks will check with Pedders asap. Also found a local plastics place that may have some

_________________
'72 PR60 Sport


Tue Dec 22, 2015 9:38 am
Profile WWW

Joined: Sun Jun 14, 2009 8:44 am
Posts: 348
Location: central coast
Car(s): 1967 bellett gt, wasp trayback , 2018 d-max 4x4 dual cab LSU, 2016 Focus, 1996 GQ Patrol
Reply with quote
The guys that will be making my bushes next year are the ones that supply Pedders,Nolathane and Red Ranger with all their material.


Tue Dec 22, 2015 11:10 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 16 posts ] 

Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.