| bellett.net https://bellett.net/forums/ |
|
| Brake Master Cylinder Cap rubber top https://bellett.net/forums/viewtopic.php?f=35&t=3117 |
Page 1 of 1 |
| Author: | Asroc66 [ Mon Aug 24, 2015 4:31 am ] | ||
| Post subject: | Brake Master Cylinder Cap rubber top | ||
Hi Ladies and Gents Would anyone have a decent spare rubber cap for the master cylinder pictured In the spirit of all things purist. Alternatively is there a modern alternative that is readily available It is 25mm in diameter Many thanks J
|
|||
| Author: | pa_man [ Mon Aug 24, 2015 6:26 am ] |
| Post subject: | Re: Brake Master Cylinder Cap rubber top |
Other thing would be if someone has a good original or NOS oz_toffa can copy it so so the copies would look as close to the original as possible. Oz has made copies of bushes etc so this am thinking wouldnt be too hard (had better ask him though)  Josh |
|
| Author: | BULLITT [ Mon Aug 24, 2015 9:02 am ] |
| Post subject: | Re: Brake Master Cylinder Cap rubber top |
I had this type on my sedan it has a little rubber cap on it my gt one is different bigger with a huge rubber cap on it ?? so who has one for spare ?? |
|
| Author: | CQGT [ Sat Aug 29, 2015 11:54 am ] |
| Post subject: | Re: Brake Master Cylinder Cap rubber top |
These caps are relaced by the big cap Davo mentioned. Either or. Like rocking-horse p!!!!!.  Had a master cyl. done up a few years back and the bloke managed to get a 2nd hand 1. Every brake shop I've been to have come up zilch.  I did get 1 from the states. Cost me more in postage than part. It's in 20l drum with all of the other brake parts. Will use it on the master cyl for the GT from Adelaide and KB. Dave. |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|