bellett.net
https://bellett.net/forums/

Engine build - G180W DOHC - looking for parts sources etc
https://bellett.net/forums/viewtopic.php?f=36&t=1954
Page 2 of 2

Author:  gt orphanage [ Tue Nov 27, 2012 9:45 pm ]
Post subject:  Re: Engine build - G180W DOHC - looking for parts sources et

Gricey you sent me a pm for part numbers for twin cam they are here :?:

Author:  antus [ Wed Nov 28, 2012 7:08 am ]
Post subject:  Re: Engine build - G180W DOHC - looking for parts sources et

I dont know if he still has them, but thomas4parts on ozgemini had a batch of MLS head gaskets made up for the g200w, if you wanted to go that way, and ive taken measurements and it looks like sr20 pulsar GTIR SR20 head bolts will fit (ARP part number 202-4303). The standard SR20s are M11, but the Pulsars are M12 as are the g200w.

thomas4parts:
http://www.ozgemini.com/forums/tech/pro ... le&u=14759

other interchangability details:
http://gemisa.net/forums/viewtopic.php?f=24&t=43

For the diff, the altra-9 LSD kits are awesome. I retrofitted the sailsbery diff to my TX with one of those centers and everything about it is awesome. As for ratios the DOHC gearbox is closer ratio than stock, but they are hard to find if there isnt one on your engine allready.

Author:  flying [ Thu Oct 01, 2015 9:29 am ]
Post subject:  Re: Engine build - G180W DOHC - looking for parts sources et

Hi F3ARED

Just a comment on the chains

I used the DR58 for the bottom and a DR118 for the top - exact lengths and pitch

http://www.ebay.com.au/itm/271715845739 ... EBIDX%3AIT

Do you have the timing diagram mentioned earlier

Regards Flying

Author:  flying [ Thu Oct 01, 2015 9:33 am ]
Post subject:  Re: Engine build - G180W DOHC - looking for parts sources et

Just to clarify further

this is for the blue top motor with the original oil driven chain tensioners not the later ratchet design

Cheers
Flying

Page 2 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/