bellett.net
https://bellett.net/forums/

Bellett gt hood lining
https://bellett.net/forums/viewtopic.php?f=37&t=1971
Page 1 of 1

Author:  Waldo [ Wed Jul 04, 2012 8:56 pm ]
Post subject:  Bellett gt hood lining

Can anyone tell me what type of material is used for a stock bellett hood lining? A photo would be real handy that shows the texture

Author:  Glenn [ Wed Jul 04, 2012 10:00 pm ]
Post subject:  Re: Bellett gt hood lining

not much help really except to say that the original style material was avaialble here, when i did my last GT.

glenn

Author:  1968GT [ Sat Jul 07, 2012 9:44 am ]
Post subject:  Re: Bellett gt hood lining

Hey Waldo,
Since I have Glenns GT he last restored, I will try to get a photo for you.

I will try to get it up ASAP.
Regards,
Dave M.

Author:  1968GT [ Fri Jul 27, 2012 5:22 am ]
Post subject:  Re: Bellett gt hood lining

Waldo,

SORRY, I have let you down with these photos, I will try to remember on Sunday as I won't be home until Sunday.
I have been working on the GT repairing brakes and still I forgot, you know what it is like as you get older :lol:
Geeshh! shouldn't admit to that eh!!!

I will post the photos on Sunday. :o
Dave M.

Author:  Glenn [ Fri Jul 27, 2012 5:59 am ]
Post subject:  Re: Bellett gt hood lining

Dave

re the leak you have... there's a post on here somewhere with a seal for the master cylinder to reservoir......

glenn


Guys does anyone know where I can get some rubbers to fit between the master cylinder body and the reservoir.
The original rubbers on my master had perished and I have tried both brass abd fibre washers, but still have a leak between the two.
Would plumbing rubbers as used in toilet fittings etc work or would the brake fluid stuff them? Cause I reckon there would be a size to fit in the local plumbing supplies joint.
Somebody please help turn my frown upside down


Reply with quote
Post Re: fitting sigma discs to bellett
Try PBR kit K7308X Boot should fit

Author:  flying [ Mon Jul 30, 2012 5:14 am ]
Post subject:  Re: Bellett gt hood lining

Waldo

bit dirty but I beleive original

Attachments:
DSCN0726[1].JPG
DSCN0726[1].JPG [ 2.54 MiB | Viewed 13991 times ]
DSCN0735[1].JPG
DSCN0735[1].JPG [ 3.53 MiB | Viewed 13991 times ]

Author:  1968GT [ Mon Sep 10, 2012 3:56 am ]
Post subject:  Re: Bellett gt hood lining

WALDO,

Yep I KNOW bloody SLACK, ooops sorry :oops: , try these photos, not sure what vinyl grain you can see but these are of the material Glenn used in the roof lining in the GT I have now!
There are 5 ribs, equally distanced between each bar.

I hope these are of assistance of not TOO LATE!!! :(
Dave M.

Attachments:
GT ROOF LINING 1.JPG
GT ROOF LINING 1.JPG [ 39.41 KiB | Viewed 13801 times ]
GT ROOF LINING 2.JPG
GT ROOF LINING 2.JPG [ 57.1 KiB | Viewed 13801 times ]
GT ROOF LINING 3.JPG
GT ROOF LINING 3.JPG [ 54.35 KiB | Viewed 13801 times ]
GT ROOF LINING 4.JPG
GT ROOF LINING 4.JPG [ 66.46 KiB | Viewed 13801 times ]

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/