bellett.net
https://bellett.net/forums/

HANDBRAKE BOOT
https://bellett.net/forums/viewtopic.php?f=37&t=2574
Page 1 of 2

Author:  BULLITT [ Wed Dec 18, 2013 5:56 am ]
Post subject:  HANDBRAKE BOOT

HI GUYS ON EBAY HANDBRAKE BOOTS OFF A MK 2 CORTINA ..NEW CLOSE LOOKING TO THE BELLETT COST 27.27 PLUS POSTAGE X ENGLAND 7.00 ITEM 230502293078 CHEERS DAVO

Attachments:
!ByhMdVg!2k~$(KGrHqJ,!joEw5JYckHjBMSGKuNTfQ~~_12[1].jpg
!ByhMdVg!2k~$(KGrHqJ,!joEw5JYckHjBMSGKuNTfQ~~_12[1].jpg [ 14.48 KiB | Viewed 36046 times ]

Author:  gt orphanage [ Wed Dec 18, 2013 6:44 am ]
Post subject:  Re: HANDBRAKE BOOT

I bought bellett ones in Japan. I can get more but not they will be over $50.

Author:  1968GT [ Wed Dec 18, 2013 7:14 am ]
Post subject:  Re: HANDBRAKE BOOT

Rubber, Vinyl or Leather Greg? :)

Author:  gt orphanage [ Wed Dec 18, 2013 7:19 am ]
Post subject:  Re: HANDBRAKE BOOT

Rubber in Isuzu packaging.

Author:  BULLITT [ Wed Dec 18, 2013 8:33 am ]
Post subject:  Re: HANDBRAKE BOOT

EXCELLENT WELL DONE GREG

Author:  gt orphanage [ Sun Feb 02, 2014 10:14 am ]
Post subject:  Re: HANDBRAKE BOOT

I had a enquiry or genuine boots 5000yen around $55.00 packing 1000yen and 1500yen postage. In total we are looking at $85 to bring 1 in I would assume I we ordered ten the packing and freight would not change a lot. This figure could be split. If you want 1 or some please indicate your interest before the 12th of feb and I will put a order in.

Author:  1968GT [ Mon Feb 03, 2014 4:11 am ]
Post subject:  Re: HANDBRAKE BOOT

COUNT ME IN PLEASE GREG, I BELIEVE GLENN PERCY WOULD LIKE ONE ALSO.
Has anyone tried the Cortina leather boots, do they fit???

Author:  Glenn [ Mon Feb 03, 2014 4:50 am ]
Post subject:  Re: HANDBRAKE BOOT

1968GT wrote:
COUNT ME IN PLEASE GREG, I BELIEVE GLENN PERCY WOULD LIKE ONE ALSO.
Has anyone tried the Cortina leather boots, do they fit???

I will need to check mine over 1st, so don't count me in just yet

Author:  PR91 [ Mon Feb 03, 2014 12:37 pm ]
Post subject:  Re: HANDBRAKE BOOT

My GT had a $20 SaaS leather one from autobahn (i think. was a few years ago).
Nobody has noticed the difference.

Author:  redback [ Mon Feb 03, 2014 8:51 pm ]
Post subject:  Re: HANDBRAKE BOOT

Yes Please.

I would love a new one - count me for one thanks GT Orph.

Nice find.

Cheers
Neil

Author:  gt orphanage [ Mon Feb 03, 2014 9:47 pm ]
Post subject:  Re: HANDBRAKE BOOT

PR91 wrote:
My GT had a $20 SaaS leather one from autobahn (i think. was a few years ago).
Nobody has noticed the difference.

Some of mine were made. The genuine ones freighted work out expensive, however I bought some while in japan as well as other stuff and packed it in boxes and sent it home. Just before we left Japan we posted clothes home and packed our bags with parts. It was case of buying parts rom Japanese suppliers to open trade and helped with the trade/trust relationship.
If any serious enquiry's for parts out of japan feel free to ask we can get it sent with boots. This is at cost as the yen receipt can be shown. My interest in supplying the parts is keeping these channels open and develop a better relationship with the Japanese enthusiasts.

Author:  PR95 [ Mon Feb 03, 2014 10:44 pm ]
Post subject:  Re: HANDBRAKE BOOT

I want 2 outer front bumper bar brackets for GTR. :D

Author:  Glenn [ Mon Feb 03, 2014 11:35 pm ]
Post subject:  Re: HANDBRAKE BOOT

PR95 wrote:
I want 2 outer front bumper bar brackets for GTR. :D


might be tough to get those.

what do they look like ? I thought they would be similar to oridinary bumper fittings, with the dropped light bar in the the middle, supporting the inners of the short bumperettes

Author:  PR95 [ Tue Feb 04, 2014 12:16 am ]
Post subject:  Re: HANDBRAKE BOOT

No, they are on the outer end of the bumperetts and bolt thought the mud guard. Dave Carey will know what I mean. The rear bumper on the GT is also bolted the same way, not sure how the sport is done, does not have a rubber block to fit into like earlier models.
Will be ex Japan part, unless some one is parting out a GTR.. :o

Author:  Glenn [ Tue Feb 04, 2014 12:28 am ]
Post subject:  Re: HANDBRAKE BOOT

PR95 wrote:
No, they are on the outer end of the bumperetts and bolt thought the mud guard. Dave Carey will know what I mean. The rear bumper on the GT is also bolted the same way, not sure how the sport is done, does not have a rubber block to fit into like earlier models.
Will be ex Japan part, unless some one is parting out a GTR.. :o

On the sport rear there is no rubber like a normal sedan.

There is no rubber into the body but then a 'loop' metal strap bolts through the lower outside of the bumper. Not on the inside like other Belletts

I will check my parts stock for GTR if you like ;) ;) ;)

Author:  67GT [ Tue Feb 04, 2014 4:43 am ]
Post subject:  Re: HANDBRAKE BOOT

Hi Greg,
You can put me down for one too please.
Thanks, Warren.

Author:  Glenn [ Tue Feb 04, 2014 9:33 am ]
Post subject:  Re: HANDBRAKE BOOT

I checked mine tonight. Its fine.

thanks

Author:  1968GT [ Wed Feb 05, 2014 1:32 am ]
Post subject:  Re: HANDBRAKE BOOT

A spare might be handy down the track Glenn!! :lol:
I have just fitted my spare now I need another spare 8-) :lol:

Author:  dave [ Wed Feb 05, 2014 10:30 am ]
Post subject:  Re: HANDBRAKE BOOT

Heya Greg I'm assuming we're talking GT-only?

If so, I could do with one!

Author:  PR91 [ Wed Feb 05, 2014 10:44 am ]
Post subject:  Re: HANDBRAKE BOOT

Dave,
GT, sedan, even Wasp.... Same same.

Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/