| bellett.net https://bellett.net/forums/ |
|
| rubber leaves black marks after cut and polish? https://bellett.net/forums/viewtopic.php?f=38&t=2481 |
Page 1 of 1 |
| Author: | mrflibbles [ Sun Sep 08, 2013 6:51 am ] |
| Post subject: | rubber leaves black marks after cut and polish? |
Hi guys this is more of a detailing question, Im giving the florian a light cut and polish and when i get close to the window rubbers its leaving black smudges over the polished parts, is there a way to prevent this or do i have to just keep going over the black smudges till it comes off? (also noticed the same thing to a lesser extent when washing the old girl) thanks for any tips or advice guys! and if it was my bellett i would never notice as that just gets the odd hose down being the rat it is! cheers guys Paul |
|
| Author: | BULLITT [ Sun Sep 08, 2013 7:08 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
my 2 bobs worth I would polish( and I do) the rubbers gets all the black crap off them (age) then when you are cutting they wont pick up the black ...how do you get the black off you may ask ...I will tell you get some petrol on a rag take off the black rubber marks and then polish where the marks once were see how you go ...cheers davo just like I use petrol to pick up all the tar spots on the lower door and guard panels ..........happy polishing not long to go ...for adelaide |
|
| Author: | mrflibbles [ Sun Sep 08, 2013 7:21 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
thanks mate! so far i have done nearly half the car and just left a good inch around the windows! i will try polishing the rubbers first! and yes i use petrol for all sorts of marks as well as weed killer! and i cant wait to meet you all here in Adelaide! im a little excited! |
|
| Author: | Retroasted [ Sun Sep 08, 2013 8:17 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
Just watch you don't accidentally use some spiked with ethanol that stuff can really break down old nitro celluose paint and accrylics its bad very bad |
|
| Author: | mrflibbles [ Sun Sep 08, 2013 8:24 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
the stuff i get doesnt have ethanol in it yet.... although it may contain traces of diesel at times! i do try not touse petrol on my paints but it is great for getting tar off, usually wash the area straight after too. i tried bullitts suggestion and it seems to lessen the marks quite a bit, doesnt eliminate them entirely but makes them alot less visible, i will go over the window surround area again later as im running out of light now! next job is to polish the hubcaps and chrome, then zip tie the hubcaps on! |
|
| Author: | dave [ Sun Sep 08, 2013 9:09 pm ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
And some autosol on the bumpers! |
|
| Author: | Glenn [ Mon Sep 09, 2013 12:36 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
Not tried it, but Grease and wax remover might work Won't harm the pain either./ glenn |
|
| Author: | mrflibbles [ Mon Sep 09, 2013 5:31 am ] |
| Post subject: | Re: rubber leaves black marks after cut and polish? |
cheers Glenn ill give that a try! Dave dont worry the chrome wont be forgotten! |
|
| Page 1 of 1 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|