bellett.net
https://bellett.net/forums/

Orientation of front side repeater lights
https://bellett.net/forums/viewtopic.php?f=38&t=2931
Page 1 of 1

Author:  flying [ Tue Jan 06, 2015 8:43 am ]
Post subject:  Orientation of front side repeater lights

Hi

I recall a comment from judging at nationals regarding the repeater light being installed upside down

Can someone confirm which is the correct way up

I had a look and I must admit I always thought that they were symmetrical. Is the long side up or down -- I would have assumed that the longer side was up

Regards
Flying

Author:  BULLITT [ Tue Jan 06, 2015 9:13 am ]
Post subject:  Re: Orientation of front side repeater lights

hi mate at greg and lizs ..funny that came up and after a 1000 drinks everybody spoke about this ...mmmmm its worth pursuing . glenn.potter has no leaf spring at all and has his rear end tied down ask him what he explained to me seemed pretty logic the arse then doesn't tuck under it fans out ..I guess we will all have our ideas for our cars ...glenn ironically has a great little teardrop he races ..its done about 30.000 miles its a gem ...cheers davo my 2 bobs worth

Author:  BULLITT [ Tue Jan 06, 2015 9:15 am ]
Post subject:  Re: Orientation of front side repeater lights

sorry mate the scotch has set in and why not ...you are talking blinkers ....mine are on ...sorry went off in a tangent ....blinkers on the car ...oh im not up to that yet cheers davo

Author:  dave [ Tue Jan 06, 2015 10:41 am ]
Post subject:  Re: Orientation of front side repeater lights

Hey George,

My understanding is that they droop down, with the long, curved side on the top and the shorter side underneath.

You can see what I mean here, in this brochure shot of a rare, 2-headlight 1964 Bellett 1300.

Attachment:
1964 Isuzu Bellett 1300 brochure - Japanese - 12 pages - 08 - portion.jpg
1964 Isuzu Bellett 1300 brochure - Japanese - 12 pages - 08 - portion.jpg [ 185.43 KiB | Viewed 12419 times ]


This was taken from this brochure: http://ns1.bellett.net/forums/viewtopic ... w=previous

Check it out!


Cheers,


Dave

Author:  Farmer [ Mon Jan 12, 2015 12:26 pm ]
Post subject:  Re: Orientation of front side repeater lights

This is correct. Longer side to the sky. Don't put 'em on upside down 'cause it just look wrong!

Same as teardrop grille badges - thicker edge to the top. Otherwise the symbol says Uzusi. I suppose!

And 66 1/2 to 68 front parkers. The targety bit faces straight forward, not to the side.

And late overriders. Left and right front are shaped to face forward so that if you parked against a flat wall, the whole rubber would be in contact. And the rear overriders are different as the bumper is straight.

All good, hope this helps,
Cheers, Matt.

Author:  67GT [ Wed Jan 14, 2015 5:11 am ]
Post subject:  Re: Orientation of front side repeater lights

Hey Farmer,
What about the chrome strip on the Wasp grille. Thick side up or down ??

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/