View unanswered posts | View active topics It is currently Tue Mar 19, 2024 7:55 am



Reply to topic  [ 11 posts ] 
Oil Pressure Gauge sender! 
Author Message
User avatar

Joined: Tue Dec 23, 2008 2:32 am
Posts: 1266
Location: MUDGEE. NSW
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
Reply with quote
Guys,
I have found a suitable after market sender to work with the Yazaki oil pressure gauge in the GT.
Do not buy the genuine Toyota part as it will cost you the price of another car!! Well not really but 4 times the price of this part below.

The part is a Sankei part made in Japan to work with Yazaki gauges, I have fitted one to my GT and works well.
Sankei Part No, KG-812 83520 55011, it is to suit Toyota Hi Lux around the 1990's diesel engine.
$57.40 free postage on eBay.

Mine was leaking oil, I googled the problem and came up with this part, mine came from Brisbane, however I believe they are also available from Melbourne.

I hope this assists "someone" out there in Bellett world as I was concerned I would not find a suitable part, in fact I have asked the question on here and no one came up with an alternative to the genuine part.
Dave Maurice.

_________________
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!


Sat Jun 04, 2016 1:17 am
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
1968GT wrote:
Guys,
I have found a suitable after market sender to work with the Yazaki oil pressure gauge in the GT.
Do not buy the genuine Toyota part as it will cost you the price of another car!! Well not really but 4 times the price of this part below.

The part is a Sankei part made in Japan to work with Yazaki gauges, I have fitted one to my GT and works well.
Sankei Part No, KG-812 83520 55011, it is to suit Toyota Hi Lux around the 1990's diesel engine.
$57.40 free postage on eBay.

Mine was leaking oil, I googled the problem and came up with this part, mine came from Brisbane, however I believe they are also available from Melbourne.

I hope this assists "someone" out there in Bellett world as I was concerned I would not find a suitable part, in fact I have asked the question on here and no one came up with an alternative to the genuine part.
Dave Maurice.

good work Dave. Nice to know something is at hand. Is this the place? http://www.ebay.com.au/itm/Oil-Pressure-Gauge-Sender-Unit-Landcruiser-1969-1-1983-FJ-BJ-HJ-40-55-60-series-/131714173428?hash=item1eaac6c9f4:g:09cAAOSwFqJWq0Ij#shpCntId

[saw this also but much more expesnive http://www.megazip.net/zapchasti-dlya/toyota/gage-assy-oil-pressure-sender-8352055011?gclid=CInlkZiKjs0CFUccvAodZdMOQQ ]

_________________
'72 PR60 Sport


Sat Jun 04, 2016 9:39 am
Profile WWW
User avatar

Joined: Tue Dec 23, 2008 2:32 am
Posts: 1266
Location: MUDGEE. NSW
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
Reply with quote
Hi Glenn, No that one is for Landcruiser, I will email you where I bought mine. Tom bought the Landcruiser one and it reads but the oil pressure is lower that it should be, (probably due the Landcruiser being 6 cylinder) I will also take a photo of where my oil pressure gauge sits now when I am out next time later this coming week.

_________________
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!


Sat Jun 04, 2016 10:03 am
Profile
User avatar

Joined: Mon May 11, 2009 1:57 pm
Posts: 51
Car(s): 1967 Isuzu Bellett GT, 1969 Isuzu Bellett Deluxe sedan
Reply with quote
Hi Dave
I think my oil pressure sender has given up the ghost completely (previously was somewhat intermittent...), so I reckon I need to purchase a replacement as you have. Any chance you could also let me know the seller in Brisbane? Thanks in advance and thanks for doing the research on a successful replacement part!
Cheers, Paul.


Tue Jun 21, 2016 1:04 pm
Profile
User avatar

Joined: Tue May 10, 2011 2:23 am
Posts: 2816
Location: Melb.
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Reply with quote
Bellett.Boys wrote:
Hi Dave
I think my oil pressure sender has given up the ghost completely (previously was somewhat intermittent...), so I reckon I need to purchase a replacement as you have. Any chance you could also let me know the seller in Brisbane? Thanks in advance and thanks for doing the research on a successful replacement part!
Cheers, Paul.


If you search eBay for 83520-55011, you should find many of them. Dave can confirm where he got his from.

PRODUCT DESCRIPTION

12 volt OIL PRESSURE GAUGE SENDER SWITCH

Only suits Landcruisers with Oil Pressure Indicator Gauge as Original.
This is not the sender for oil indicator light. 4x4 TOYOTA LANDCRUISER 4WD

Years 1969-1970-1971 1972-1973-1974-1975 1976-1977-1978 1979-1980-1981-1982 to 1/1983
40 Series - 3B, 2F, 2H - BJ42, FJ40, HJ47
60 Series - 2H, 2F - HJ60, FJ60
55 Series - F, 2F - FJ55
40 Series - F, 2F, H, 2H - FJ40, FJ45, HJ45, HJ47 -

Only suits Hilux with Oil Pressure Indicator Gauge as Original.
This is not the sender for oil indicator light. 4x4 Toyota Hilux 4WD
Years 1979-1980-1981-1988-1990-1991-1992-1993-1994-1995 RN36 RN46 - 1979-1980-8/1981

RN105 RN106 RN110 LN106 LN107 LN111 LN130 YN130 VZN130
REPLACES ORIGINAL YAZAKI SENDER ONLY (NOT DENSO)
Years - 8/1988-1989-1990-1991-1992-1993-1994-1995
Other Info

Thread - 1/8 GAS
Spanner - 14mm

The oil pressure sender is designed to send a signal to your oil pressure gauge on the vehicles dashboard.
This indicates the current oil pressure in your engine allowing you to monitor your engines running pressure condition.

Reference 83520-55011, ZPN-00802

_________________
'72 PR60 Sport


Tue Jun 21, 2016 11:32 pm
Profile WWW
User avatar

Joined: Tue Dec 23, 2008 2:32 am
Posts: 1266
Location: MUDGEE. NSW
Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
Reply with quote
Sorry Paul, I have been a bit busy.
Make sure you DO NOT buy the Landcruiser sender, reads less pressure. With the new part my pressure gauge now reads correctly.
The sender is to suit Hi Lux Yazaki gauge, read my previous message where I quoted the psrt number. I am not home right now, however when I return, I will photograph the box it came in, it is from a 4X4 Co located when I googled the problem.
Dave.

_________________
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!


Wed Jun 22, 2016 11:36 am
Profile
User avatar

Joined: Mon Nov 15, 2010 3:11 am
Posts: 259
Location: Adelaide
Car(s): 1967 GT Bellett
Reply with quote
Hi Paul

Did you get your engine sorted?

It would to see that beautiful car out and about

Cheers Flying


Thu Jun 23, 2016 9:50 am
Profile
User avatar

Joined: Mon May 11, 2009 1:57 pm
Posts: 51
Car(s): 1967 Isuzu Bellett GT, 1969 Isuzu Bellett Deluxe sedan
Reply with quote
Thanks Dave and Glenn - I've just ordered the unit for Hilux part number 83520-55011 from the Melbourne 4x4world supplier. Hopefully it arrives end of the week so I can fit on the weekend and go for a spin. Thanks again Dave for the groundwork on finding this replacement part!

Yes Flying, the engine has at last been fixed - took a few years to save the dosh to have it rebuilt by our expert over the border in enemy territory. Have had it out and about a bit since I brought it back to SA - about 3500+ miles in fact. Driving down to work in beautiful McLaren Vale racks up a few miles... And if anyone is still unsure (that means you PR91), McLaren Vale still makes the best reds in Oz (except maybe Pinot, but that's expensive).

Plans are in progress to finally show up at a nationals with a car again.

Cheers everyone.


Tue Jun 28, 2016 1:42 pm
Profile

Joined: Tue Sep 16, 2008 11:54 am
Posts: 2542
Reply with quote
Dream on clown.
Victoria is the home of Bellett knowledge, and the best wines.
Proven time and time again.


Wed Jun 29, 2016 9:33 am
Profile

Joined: Mon Jan 10, 2011 1:03 pm
Posts: 2419
Car(s): 1966 TEARDROP ...MANUAL ...
Reply with quote
I still like the 4ltr casket of fruity lexia ....beautiful its made anywhere ......cheap too ...bit of a hangover tho


Thu Jun 30, 2016 9:31 am
Profile
User avatar

Joined: Fri Apr 10, 2009 11:29 pm
Posts: 1524
Location: Kallangur, Brisbane QLD
Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
Reply with quote
Bellett.Boys wrote:
And if anyone is still unsure (that means you PR91), McLaren Vale still makes the best reds in Oz (except maybe Pinot, but that's expensive).


Amen brother :mrgreen:

Bellett.Boys wrote:
Plans are in progress to finally show up at a nationals with a car again.


You better..... :lol:

_________________
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au


Fri Jul 22, 2016 9:11 am
Profile YIM WWW
Display posts from previous:  Sort by  
Reply to topic   [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software for PTF.