bellett.net
https://bellett.net/forums/

GT Extractors WANTED
https://bellett.net/forums/viewtopic.php?f=6&t=1992		 Page 1 of 2
Author:  bembokabellettbloke [ Mon Jul 30, 2012 9:15 am ]
Post subject:  GT Extractors WANTED
WANTED
GT EXTRACTORS 1967
GOOD CONDITION
:D :) :mrgreen: GOOD CONDITION :) :D :ugeek:

PPPPPLLLEEEAAASSSEEEEEEEEEEEEEEE
Author:  PR91 [ Mon Jul 30, 2012 1:04 pm ]
Post subject:  Re: GT Extractors WANTED
:lol: :lol: :lol: :lol: :lol:
i had to make mine Gaz....
Author:  gricey [ Mon Jul 30, 2012 7:57 pm ]
Post subject:  Re: GT Extractors WANTED
Gaz. I can lend you a set to copy if you need . Gricey
Author:  1968GT [ Mon Jul 30, 2012 11:26 pm ]
Post subject:  Re: GT Extractors WANTED
Guys,
If we can find a maker, I could be interested also, maybe one of our Clubs could could back us?????
Surely there would be others in our group that would either need them or would like a spare set??
Dave M.
Author:  Glenn [ Mon Jul 30, 2012 11:37 pm ]
Post subject:  Re: GT Extractors WANTED
Be nice to get them coated also but would add maybe $200
Author:  1968GT [ Tue Jul 31, 2012 2:41 am ]
Post subject:  Re: GT Extractors WANTED
C'mon Glen, put your TAFE skills to work and you could make them for us in ss???? ;)
make a few dollars for yourself!!! :lol:
Author:  Glenn [ Tue Jul 31, 2012 3:08 am ]
Post subject:  Re: GT Extractors WANTED
Mmm nice idea but would be very expensive i think. I built my Hotrod exhaust system from 316 stainless and a hell of a job. Twin system of course. I used mandrel bends from the steel headers, which are none too cheap either. S/S tends to crack also under very high heat and of course, goes blue too.

I think the mild steel and ceramic coated is the way to go. You need to find a exhaust shop with a mandrel bender which is not too common. Or buy a bunch of bends which is what i did when i fitted the Toyota :shock: :shock: DOHC engine to my old white GT and weld them up. Tedious to do and even worse to do many of them especially after you watch a shop doing it with a machine.
If a set could be used as a dummy and a jig made from it, a shop should be able to make as many as needed and a spare or two.

BCCV might look at it maybe ?

glenn
Author:  1968GT [ Tue Jul 31, 2012 4:38 am ]
Post subject:  Re: GT Extractors WANTED
MILD steel will do!!! :lol:
Author:  Glenn [ Tue Jul 31, 2012 6:31 am ]
Post subject:  Re: GT Extractors WANTED
1st step would be to get a number of the plates made.
Author:  gt orphanage [ Tue Jul 31, 2012 7:58 am ]
Post subject:  Re: GT Extractors WANTED
I had a plate made for the race car $80. I have a set of gt one here that are rusty let me know if you want plates made and i will get some done. I can see if he wants to make a set of extractors from the dummy set i have ? Or i have a gt engine here i can fit to the sedan i have the front cut out, a guy in our car club has contacts to cut the plates and he works for a exhaust shop.
Author:  Glenn [ Tue Jul 31, 2012 8:58 am ]
Post subject:  Re: GT Extractors WANTED
Hi Greg
since i am not an offcie bearer of bccv now, it's best for the BCCV Pres. or Parts officer to bring this up with Committee and see which way to head i think.

Your offer of a rusty set to get started I am sure would be appreciated.

glenn
Author:  BULLITT [ Tue Jul 31, 2012 9:03 am ]
Post subject:  Re: GT Extractors WANTED
hey glenn gricey has a good set unrusty ...i have seen them ...cheers davo .....
Author:  Glenn [ Tue Jul 31, 2012 9:23 am ]
Post subject:  Re: GT Extractors WANTED
even rusty should be ok for a competent maker i think and if a few a being made, a jig could be made off it

I don't have any contacts for making these but one of the BCCV Comm. might.

In the end it will depend on the demand i guess

glenn
Author:  bembokabellettbloke [ Tue Sep 04, 2012 8:16 am ]
Post subject:  Re: GT Extractors WANTED
thanks for all info and offers guys

you are a good bunch..... :mrgreen: :geek: :mrgreen:
Author:  bembokabellettbloke [ Tue Sep 18, 2012 8:48 am ]
Post subject:  Re: GT Extractors WANTED
ok......Ive had a set made...they look GREAT!!!!!! :mrgreen: :mrgreen: :mrgreen:

iVE FOUND A GREAT YOUNG BLOKE TO MAKE THEM....HE IS INTERESTED IN MAKING MORE....
WHO IS INTERESTED? :D :) :mrgreen:

photos coming!
Author:  degruch [ Tue Sep 18, 2012 8:51 am ]
Post subject:  Re: GT Extractors WANTED
Tentatively I'd have to say 'yes' - keen as, but have notoriously unreliable finances presently. Cost?
Author:  1968GT [ Tue Sep 18, 2012 9:01 am ]
Post subject:  Re: GT Extractors WANTED
yep, cost please?
Author:  bembokabellettbloke [ Tue Sep 18, 2012 9:03 am ]
Post subject:  Re: GT Extractors WANTED
you will be able to see them at The Nationals.....hehehheheeheheh :mrgreen: ...hopefully on the car! :shock:

I havent got them yet....they due here anyday! :lol:

just doing photos now.... ;)
Author:  bembokabellettbloke [ Tue Sep 18, 2012 9:06 am ]
Post subject:  Re: GT Extractors WANTED
p.s...they are made of stainless steel! :mrgreen:
Author:  bembokabellettbloke [ Tue Sep 18, 2012 9:34 am ]
Post subject:  Re: GT Extractors WANTED
here are some photos ;)

Attachments:
2012-09-13 09.34.29.jpg
2012-09-13 09.34.29.jpg [ 245.32 KiB | Viewed 24479 times ]
2012-09-13 09.34.48.jpg
2012-09-13 09.34.48.jpg [ 245.12 KiB | Viewed 24479 times ]
Page 1 of 2 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/