PR91 thinks so.......
Quote:
maybe that would suit waldo
Quote:
From your previous wanted post.
Cheers, Matt.
| bellett.net https://bellett.net/forums/ |
|
| Bellett 4:11 diff gears https://bellett.net/forums/viewtopic.php?f=6&t=2063 |
Page 1 of 2 |
| Author: | Waldo [ Mon Sep 17, 2012 12:47 am ] |
| Post subject: | Bellett 4:11 diff gears |
Will pay $200 to anyone who can supply me with a good set of 4:11 diff gears!! |
|
| Author: | Glenn [ Mon Sep 17, 2012 1:37 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
for any car? LOL they seem to exist but anybody with some from a Bellett are holding on to them |
|
| Author: | Waldo [ Mon Sep 17, 2012 1:45 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
I know they exist to id rather buy a set from someone here as the only other set i know for sale is on yahoo but its $700 for the whole diff and it isnt even an lsd i only need the gears anyway so if someone can help me here it would save me a lot of money |
|
| Author: | Farmer [ Mon Sep 17, 2012 5:01 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
Waldo, my appologies for not getting to the spare Florian diff yet. Seems every day there's something necessary to do that keeps me from playing cars. But that is a situation unlikely to change, so I'd better just do it. I've looked in the manual & it looks easy enough to remove the carrier & centre, so I'll pull that & send the whole thing. It looks as though I can put the axles back into the housing, so I can still move it around. (Tracy really doesn't like cars without wheels on them!) I can't charge you 'cause I don't know the condition, hopefully you will be able to tell if it's OK. Just the postage maybe. It shall be done this week! And I'll let you know when I've sent it. Cheers, Matt. |
|
| Author: | Waldo [ Mon Sep 17, 2012 5:17 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
haha thats no worries mate but before you start busting blood vessels pulling it out do we know if the florian diffs are the same as a bellett diff? |
|
| Author: | mrflibbles [ Mon Sep 17, 2012 8:42 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
i think the crown wheel and pinions are interchangeable, i have a florian diff centre here i was going to try swapping the bits into a bellett diff but havent had the time or spare bellett diff to try it with. Im sure there is someone that knows if the bits will fit or not! |
|
| Author: | Farmer [ Tue Sep 18, 2012 12:28 pm ] |
| Post subject: | Re: Bellett 4:11 diff gears |
PR91 thinks so....... Quote: maybe that would suit waldo Quote: From your previous wanted post. Cheers, Matt. |
|
| Author: | Waldo [ Wed Sep 19, 2012 2:13 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
Yeah all im after is a crown wheel and pinion with 4:11 ratio i had my lsd full recoed but i need to swap the ratios thats all |
|
| Author: | Waldo [ Wed Sep 19, 2012 3:23 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
I just found my old wanted add read what pr91 said. And realised wasp diffs are 4:56 thats would be awesome! Wonder if the wasp diff gears are the same as belletts? But who would have a set of the 4:56 gears...probably nobody. |
|
| Author: | OzLuvTrucker [ Wed Sep 19, 2012 9:05 pm ] |
| Post subject: | Re: Bellett 4:11 diff gears |
I have a few KB Isuzu/Chev Luv 9/41 4:56 and 8/41 5:125 centre's laying around. |
|
| Author: | Waldo [ Fri Sep 21, 2012 5:29 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
do they fit in a bellett diff housing? do you know? |
|
| Author: | OzLuvTrucker [ Fri Sep 21, 2012 8:53 am ] | ||
| Post subject: | Re: Bellett 4:11 diff gears | ||
Im unsure if they will fit Bellet or Florian, they are commonly known as a 10 bolt amongst Isuzuists.
|
|||
| Author: | Waldo [ Fri Sep 21, 2012 10:14 pm ] |
| Post subject: | Re: Bellett 4:11 diff gears |
cheers for the pic yeah im pretty sure the bellett diffs are 8 bolt not 10 
|
|
| Author: | OzLuvTrucker [ Sat Sep 22, 2012 12:17 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
I have 4.56 diffs from the front 4x4 Chev Luv/KB Isuzu which are 8 bolt. 
|
|
| Author: | Waldo [ Sat Sep 22, 2012 1:47 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
hmm do you have a pic of those gears by any chance? mainly of the crown and pinion gear really by themselves or are they still in a housing. |
|
| Author: | OzLuvTrucker [ Sat Sep 22, 2012 5:05 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
Best i can do currently.    
|
|
| Author: | BULLITT [ Sat Sep 22, 2012 6:07 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
unbeleivable ..hope all is well ....lets know the situation cheers davo |
|
| Author: | Waldo [ Sat Sep 22, 2012 7:25 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
hmm interesting...i wonder what the pinion gear looks like thats the main thing...where abouts are you? |
|
| Author: | OzLuvTrucker [ Sat Sep 22, 2012 8:03 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
Riverland S.A 2hrs from Adelaide 1.5 from Mildura Vic. Would a front diff work in the rear?  Will you have four reverse gears and one forward etc. 
|
|
| Author: | mrflibbles [ Sat Sep 22, 2012 9:47 am ] |
| Post subject: | Re: Bellett 4:11 diff gears |
Will you have four reverse gears and one forward etc. easy to fix, put the gearbox in backwards... |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|