bellett.net
https://bellett.net/forums/

FRONT WINDCREENS GT
https://bellett.net/forums/viewtopic.php?f=6&t=3218		 Page 1 of 1
Author:  BULLITT [ Thu Jan 28, 2016 7:23 am ]
Post subject:  FRONT WINDCREENS GT
I know this has been posted somewhere please save me time I may have to take out my front screen to repair 90 are the 91 screens the same or will I have to locate a 90 screen should it be totally different that will depend on the window being removed anyone help an old pensioner cheers davo anyone ??
Author:  gt orphanage [ Thu Jan 28, 2016 11:14 am ]
Post subject:  Re: FRONT WINDCREENS GT
If the screen is ok cut the rubbers out completely round the outside and 2 people for a even push :oops: :? Same for the rear.
Author:  BULLITT [ Fri Jan 29, 2016 7:30 am ]
Post subject:  Re: FRONT WINDCREENS GT
the screen is pretty chipped love a newy anyone know where ???? they are avail
Author:  flying [ Fri Jan 29, 2016 8:47 am ]
Post subject:  Re: FRONT WINDCREENS GT
Davo

Phil's Rotaries were selling these a while ago

you may need to contact to check if another run is being made

Cheers
Flying
Author:  BULLITT [ Fri Jan 29, 2016 9:19 am ]
Post subject:  Re: FRONT WINDCREENS GT
hi mate he was selling the rubbers ..I think not screens cheers davo
Author:  gt orphanage [ Fri Jan 29, 2016 11:22 am ]
Post subject:  Re: FRONT WINDCREENS GT
Davo When myself and pr95 had them made was through Phil we paid a grand to have the mould made. Phil may have access to this but he will most probably want a order for ten? I recall him having a falling out with someone I am not sure if it is the mob that did the screens but contact Phil he will know where the mould is.
Failing that morans in Brisbane could get them depends on how many for a order?
Word is that pr90 will fit 91? but not the other way ? I am happy to be corrected on this if someone can confirm. Phils are based on a 91 screen we supplied.
Author:  flying [ Fri Jan 29, 2016 1:08 pm ]
Post subject:  Re: FRONT WINDCREENS GT
Davo
Have you thought of repairing the chips and then polishing the screen?

http://www.ebay.com.au/itm/Car-Windscre ... 1792252981

http://www.glasspolish.com.au/shop/wind ... epair-kit/

Cheers Flying
Author:  PR91 [ Mon Feb 01, 2016 10:05 pm ]
Post subject:  Re: FRONT WINDCREENS GT
I worked in the windscreen industry for years..... And I wouldn't polish one.
Polishing changes the glass thickness, even by the minimum amount, which changes the way the glass works and can give distorted images. Think of how a magnifying glass works.....
Its a fine line between it being OK and not, and once it's distorted, its ruined.
Author:  BULLITT [ Mon Feb 01, 2016 11:03 pm ]
Post subject:  Re: FRONT WINDCREENS GT
no probs ...no polishing will get a new one cheers anyway flying .davo
Author:  Gunna [ Tue Feb 02, 2016 3:09 am ]
Post subject:  Re: FRONT WINDCREENS GT
Hey Brett
I'm heading to Melbourne this weekend. Did you still want some GT screens. I'm on the fly so you'll have to catch me somewhere or another???

Davo,
Screens here if you need them. But I want your first born and a kidney;-)
Author:  Glenn [ Tue Feb 02, 2016 9:28 pm ]
Post subject:  Re: FRONT WINDCREENS GT
PR91 wrote:
I worked in the windscreen industry for years..... And I wouldn't polish one.
Polishing changes the glass thickness, even by the minimum amount, which changes the way the glass works and can give distorted images. Think of how a magnifying glass works.....
Its a fine line between it being OK and not, and once it's distorted, its ruined.


Yes very true, Brett. Having said that, my 1st GT had the screen polished as in those days no new ones were available. As far as I know its still in the car and never seemed to be a problem. The guy that did it took several hours so I assume it was done pretty evenly. Or pot luck. :)

Later, on the grey GT, i had a new screen to be fitted and on trying to fit it, it was too small. (height) Perhaps it was an early GT screen? I never knew there was a difference in GT screens though.
Author:  gt orphanage [ Tue Feb 02, 2016 9:40 pm ]
Post subject:  Re: FRONT WINDCREENS GT
Glenn wrote:
PR91 wrote:
I worked in the windscreen industry for years..... And I wouldn't polish one.
Polishing changes the glass thickness, even by the minimum amount, which changes the way the glass works and can give distorted images. Think of how a magnifying glass works.....
Its a fine line between it being OK and not, and once it's distorted, its ruined.


Yes very true, Brett. Having said that, my 1st GT had the screen polished as in those days no new ones were available. As far as I know its still in the car and never seemed to be a problem. The guy that did it took several hours so I assume it was done pretty evenly. Or pot luck. :)

Later, on the grey GT, i had a new screen to be fitted and on trying to fit it, it was too small. (height) Perhaps it was an early GT screen? I never knew there was a difference in GT screens though.

I don't recall how I found out the pr90/91 info and why they were different but that would explain why they only cross over 1 way?
Author:  flying [ Tue Feb 02, 2016 10:42 pm ]
Post subject:  Re: FRONT WINDCREENS GT
Hi
Continuing on from different screens I recall reading on the Finnish site that there were 2 thickness

Has anyone dealt whit this?

Flying
Author:  Stickman [ Wed Feb 03, 2016 4:18 am ]
Post subject:  Re: FRONT WINDCREENS GT
I have early sedan screens that are different thicknesses. Some are 4mm and some are 5mm (all toughened)
Laminated screens are usually either 5.38mm or 6.38mm
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/