is it a twin cam gricey
twin weber or single sorry your post is not clear.
| bellett.net https://bellett.net/forums/ |
|
| How many $ https://bellett.net/forums/viewtopic.php?f=36&t=2674 |
Page 1 of 2 |
| Author: | gricey [ Sat Mar 29, 2014 12:35 am ] |
| Post subject: | How many $ |
Any one give me a idear how mutch I should pay for a Gemini engine weber carb complete dohc.. With. A 5 speed box . Or just the box on its own. This engine was a good runner . Gricey |
|
| Author: | gt orphanage [ Sat Mar 29, 2014 12:39 am ] |
| Post subject: | Re: How many $ |
is it a twin cam gricey twin weber or single sorry your post is not clear.
|
|
| Author: | gricey [ Sat Mar 29, 2014 12:42 am ] |
| Post subject: | Re: How many $ |
Sorry Greg . It's single cam and single carby . I am realy only interested in the box . Gricey |
|
| Author: | gricey [ Sat Mar 29, 2014 12:44 am ] |
| Post subject: | Re: How many $ |
Same engine as my Gemini . And Brett's race car . Gricey |
|
| Author: | gt orphanage [ Sat Mar 29, 2014 12:46 am ] |
| Post subject: | Re: How many $ |
ok the dohc threw me. The 5 speed will not bolt to your twin cam  if that is your plan. Or do you want it for your Gemini.
|
|
| Author: | gricey [ Sat Mar 29, 2014 1:43 am ] |
| Post subject: | Re: How many $ |
[thaught it might bolt up to the twin cam . Gricey |
|
| Author: | oz_toffa [ Sat Mar 29, 2014 4:33 am ] |
| Post subject: | Re: How many $ |
think you would need a rodeo box or maybe Gemini diesel one? and different tailshaft to suit the box as well OZ |
|
| Author: | mrflibbles [ Sat Mar 29, 2014 8:24 am ] |
| Post subject: | Re: How many $ |
i can get a 1600 gemini engine down here from around 200 for complete runners, and that is complete carby to sump to alternator, just no gearbox. hope that helps? |
|
| Author: | gricey [ Sat Mar 29, 2014 7:46 pm ] |
| Post subject: | Re: How many $ |
I have a rodeo box in my Gemini its single cam . If a rodeo box is needed for the twin cam . Why doesn't the 5 speed that's with the single cam that's for sale fit the twin cam . Gricey. |
|
| Author: | Redzone [ Sat Mar 29, 2014 11:15 pm ] |
| Post subject: | Re: How many $ |
Rodeo with the c series diesel has the starter on the left, same as bellett & dohc isuzu. Diesel gemini has the starter on the right same as petrol gemini. |
|
| Author: | Glenn [ Sat Mar 29, 2014 11:23 pm ] |
| Post subject: | Re: How many $ |
Redzone wrote: Rodeo with the c series diesel has the starter on the left, same as bellett & dohc isuzu. Diesel gemini has the starter on the right same as petrol gemini. I think you can swap a Rodeo box housing with a Gemini one to get a 5 speed for a DOHC. |
|
| Author: | Redzone [ Sun Mar 30, 2014 11:06 am ] |
| Post subject: | Re: How many $ |
Yep but only the c series diesel one. |
|
| Author: | Glenn [ Sun Mar 30, 2014 9:53 pm ] |
| Post subject: | Re: How many $ |
gricey wrote: Any one give me a idear how mutch I should pay for a Gemini engine weber carb complete dohc.. With. A 5 speed box . Or just the box on its own. This engine was a good runner . Gricey Gricey I'm still confused...... o you want a Gemini engine with 5 speed or a DOHC with 5 speed or a Gemini 5 speed box only or a DOHC 5 speed box only ?? |
|
| Author: | oz_toffa [ Sun Mar 30, 2014 10:03 pm ] |
| Post subject: | Re: How many $ |
think Gricey wants a 5 speed that will bolt up to his Twin Cam??? claws here in SA has a Twin Cam in his '65 sedan and it has a Rodeo 5 speed mated to it. thanks for the clarification, Redzone. i knew it was Rodeo related but good to know what its a C series and that its diesel OZ |
|
| Author: | PR95 [ Sun Mar 30, 2014 10:22 pm ] |
| Post subject: | Re: How many $ |
In a nut shell Gricey, you need a box with the starter motor on the passenger side. 
|
|
| Author: | gt orphanage [ Sun Mar 30, 2014 11:42 pm ] |
| Post subject: | Re: How many $ |
You could cut the bell housing from a bellett and shut it to a 5 speed. Or the 5 sp you bought up for me has had the starter hole put in. The mickey mouse box as it has 2 mickey mouse ears. 
|
|
| Author: | Glenn [ Mon Mar 31, 2014 12:02 am ] |
| Post subject: | Re: How many $ |
gt orphanage wrote: You could cut the bell housing from a bellett and shut it to a 5 speed. Or the 5 sp you bought up for me has had the starter hole put in. The mickey mouse box as it has 2 mickey mouse ears. you can also cut and shut the gemini box to move the starter if you are a pretty good alloy welder, or know somebody |
|
| Author: | gt orphanage [ Mon Mar 31, 2014 12:07 am ] |
| Post subject: | Re: How many $ |
That's what is was trying to say down the middle of the bell housing with a couple of cross ribs or strength and prevent cracking. |
|
| Author: | Glenn [ Mon Mar 31, 2014 2:29 am ] |
| Post subject: | Re: How many $ |
gt orphanage wrote: That's what is was trying to say down the middle of the bell housing with a couple of cross ribs or strength and prevent cracking. you would have to remove the guts of the box and welder would need to pre-heat the whole shebang then weld it. |
|
| Author: | oz_toffa [ Mon Mar 31, 2014 10:27 am ] |
| Post subject: | Re: How many $ |
Redzone, what year did the C series diesel hit our shores? having some trouble pinning it down. cheers OZ |
|
| Page 1 of 2 | All times are UTC |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|