bellett.net
https://bellett.net/forums/

Crash's rebuild
https://bellett.net/forums/viewtopic.php?f=4&t=3133
Page 1 of 1

Author:  Gunna [ Fri Oct 02, 2015 9:33 am ]
Post subject:  Crash's rebuild

Now that the Toowoomba Nats is done and dusted, its time to focus on the Jobs To Do list and number 1 priority is getting Crash back on the road.
With only 24 hours in a day I figure 30 minutes is enough to do a bit every day.

So far I've:

Removed boot lid and hinges
Removed totally mangled tail light with the help of Lumpy the 2 pound hammer
Removed good tail light and stored away
Removed the rear bumper with the help of the crowbar
Tucked away the rear wiring after extracting it from layers of metal squashed together (again crowbar came in handy).

Just awaiting some information from various sources as to best option for panel work.

Pics to follow.

Author:  degruch [ Tue Oct 13, 2015 7:00 am ]
Post subject:  Re: Crash's rebuild

Bring on the pics! :mrgreen:

Author:  Gunna [ Tue Oct 13, 2015 7:47 am ]
Post subject:  Re: Crash's rebuild

Here goes;

This is a pic of inside the boot (for those who don't recognise it :? ).

Spare wheel was jammed in pretty damn tight, so after it was completely deflated and with a little prizing from the 6 foot crowbar it finally popped out.

The fuel tank flange (were the two parts are joined together and bolted down) was slightly bent. It'll survive ok.

The actual subframe or rear bulkhead (inside guards, a frame support pieces, rear seat bulkhead, etc) area is untouched. Just all the rear panelwork needs replacing.

The outside panels forward of the rear of the quarter glass should "de-stress" after it gets a stretch on the rack or the rear panels get cut off.

No doubt a lot of work, but that'll be done by someone who knows their stuff (hopefully).

Happy to read/listen to any advice that people may offer. PM's welcomed if commenting in public isn't your thing.

Attachments:
image.jpg
image.jpg [ 1.97 MiB | Viewed 17996 times ]

Author:  Asroc66 [ Tue Oct 13, 2015 8:09 am ]
Post subject:  Re: Crash's rebuild

Jesus H Christ............

Author:  gt orphanage [ Tue Oct 13, 2015 9:13 am ]
Post subject:  Re: Crash's rebuild

have a look at ol yella posts you will see it cut down it was hit harder than that.

Author:  Gunna [ Thu Oct 22, 2015 10:46 am ]
Post subject:  Re: Crash's rebuild

Movement at last, Crash is off to a repairer early next week with her half cut from Peter A.

Author:  Farmer [ Fri Oct 23, 2015 12:36 pm ]
Post subject:  Re: Crash's rebuild

Great you are into it already. Nice when a long saved part is put to good use, and a rare little car gets to cruise again.
Cheers, Matt.

Author:  dave [ Fri Nov 13, 2015 11:03 am ]
Post subject:  Re: Crash's rebuild

Hey Gunna,

Hope to see Duane's old baby on the road before too long!

Was sure it was a 'goner', but perhaps not!

Too many sectional repairs for the insurance company, but nothing is impossible with time, skills and tenacity...or money if you have none of the above!!

Good luck with it...Will we see it at Albury-Wodonga?

Luckily it doesn't need much else outside of the body repairs; from memory I think even the tail lights survived, yeah?

Cheers,

Dave

Author:  degruch [ Thu Feb 18, 2016 11:56 am ]
Post subject:  Re: Crash's rebuild

Anything new to report re: Crash, Dean?

Author:  Gunna [ Fri Feb 19, 2016 2:53 am ]
Post subject:  Re: Crash's rebuild

Nothing to report. She just lives the life of luxury tucked away in bed at the back of one the forty footers.

Author:  Glenn [ Fri Feb 19, 2016 3:01 am ]
Post subject:  Re: Crash's rebuild

Gunna wrote:
Nothing to report. She just lives the life of luxury tucked away in bed at the back of one the forty footers.


Hopefully not like this .......https://www.youtube.com/watch?v=qCK7N2SgJjE

Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/