bellett.net
https://bellett.net/forums/

Swapping a Isuzu engine into my Opel GT
https://bellett.net/forums/viewtopic.php?f=4&t=3759		 Page 1 of 1
Author:  gt alex [ Thu Jan 06, 2022 11:48 pm ]
Post subject:  Swapping a Isuzu engine into my Opel GT
Hoping for some help. I have a g200w I bought years ago but need a gearbox and associated parts.
I'm not fussy 4sp is fine. I have been told a Bellett box will fit but don't know if they all fit.
It' just not something I have experience with, but I am keen to get my car on the road with the twincam.
I am south of Brisbane If someone is close that would be a plus.
Thanks
Author:  Glenn [ Fri Jan 07, 2022 6:50 am ]
Post subject:  Re: Swapping a Isuzu engine into my Opel GT
gt alex wrote:
Hoping for some help. I have a g200w I bought years ago but need a gearbox and associated parts.
I'm not fussy 4sp is fine. I have been told a Bellett box will fit but don't know if they all fit.
It' just not something I have experience with, but I am keen to get my car on the road with the twincam.
I am south of Brisbane If someone is close that would be a plus.
Thanks

Hi, my aging memory is that the G200W is the DOHC engine. I had an early 117 DOHC engine (red top) and fitted a Rodeo gear box to it, 5 speed. Starter is on the correct side for the gearbox. I had to do a few things to get the clutch working but nothing hard. Long time back i did this.
You might need to be creative with the gear shift lever to bring it out in your tunnel hole. In my case I used a remote shifter mechanism from a genuine DOHC gearbox. (very hard to find)
glenn
Author:  gt alex [ Mon Jan 10, 2022 10:01 am ]
Post subject:  Re: Swapping a Isuzu engine into my Opel GT
Hi, my aging memory is that the G200W is the DOHC engine. I had an early 117 DOHC engine (red top) and fitted a Rodeo gear box to it, 5 speed. Starter is on the correct side for the gearbox. I had to do a few things to get the clutch working but nothing hard. Long time back i did this.
You might need to be creative with the gear shift lever to bring it out in your tunnel hole. In my case I used a remote shifter mechanism from a genuine DOHC gearbox. (very hard to find)
glenn[/quote]

Thanks for that reply, I just picked up some 4 spd Bellett boxes from Dean outside Ipswich I may go 5 spd later If I find one but these will get my project underway
Author:  Glenn [ Mon Jan 10, 2022 11:23 pm ]
Post subject:  Re: Swapping a Isuzu engine into my Opel GT
gt alex wrote:
Hi, my aging memory is that the G200W is the DOHC engine. I had an early 117 DOHC engine (red top) and fitted a Rodeo gear box to it, 5 speed. Starter is on the correct side for the gearbox. I had to do a few things to get the clutch working but nothing hard. Long time back i did this.
You might need to be creative with the gear shift lever to bring it out in your tunnel hole. In my case I used a remote shifter mechanism from a genuine DOHC gearbox. (very hard to find)
glenn


Thanks for that reply, I just picked up some 4 spd Bellett boxes from Dean outside Ipswich I may go 5 spd later If I find one but these will get my project underway[/quote]

Thats great, keep us posted on the project.
Page 1 of 1 All times are UTC
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/