BELLETT bonnet wedges.

1968GT · Post by **1968GT** » Sun Feb 03, 2013 6:33 am

Hi there does anyone have a source for the rubber bonnet wedges please?

We have 2 members of the group looking for bonnet wedges urgently, if anyone can assist please come back to me ASAP

gt orphanage · Post by **gt orphanage** » Mon Feb 04, 2013 10:23 am

i got them a while back from fastair :?:

i can see if we can get some more :?:

i still have some here somewhere :?:

if i find them i will not need the part no. here is the catch you need 6 per car and they only come in packs of four. maybe if we want them we can have show of hands who wants them and order enough to split into sets of 6.
I will contact fastair and see if they are willing to bring parts still. They say they no longer do it but last time i asked where they got there parts from seemed they no longer dealt in isuzu parts they were not willing to pass the info on. When i qusetioned why as they no longer did it he spoke to his boss the deal was if i could give a part number and pay when they confirmed the availability they would supply.
bottom line is if i approach this company and hagle them to place a order i need support. Better still if anything anyone wants put it on this thread in the next few days Davo has a parts book. I would get a price upon confirmation of price i would request payment and do a 1 off bulk order if they are willing to play the game. Failing this i will attempt to find where they used to get them as i will be in japan in may.

oz_toffa · Post by **oz_toffa** » Mon Feb 04, 2013 10:49 am

I can try doing a mold of them if you still have some new one, Gt orph.
must not be too hard to get the little beggers into some clay and do a 2 part pour and repeat.

let me know if you cant source new ones. i can send you a few sets for use of the originals

OZ

gt orphanage · Post by **gt orphanage** » Mon Feb 04, 2013 10:57 am

I will look tomorrow i have a pack of four here i know just not sure where to put my hands on them.

PR95 · Post by **PR95** » Mon Feb 04, 2013 10:58 am

I bought some new ones on yahoo japan, they came as a set with 2 adjustable screws for the bonnet rest, they were expensive and came a set of four and six are needed for each car.
Oz.............. mine are almost new, and I am prepared to send you one to copy if you wish.
Cheers Geoff

gt orphanage · Post by **gt orphanage** » Mon Feb 04, 2013 11:07 am

The adjustable screws are available from phills they are no worries if pr95 can send the i won't bother looking oz.

gricey · Post by **gricey** » Mon Feb 04, 2013 7:28 pm

Get me me some at least a dozen. Gricey

Stickman · Post by **Stickman** » Tue Feb 05, 2013 2:09 am

Count me in for a dozen GT, you know I'm always prepared to order for that just in case oneday I'm going to need them even though they may sit on the shelf for a decade situation...... at least I'll have them when I need them

After all Bellett bits don't grow on trees anymore :cry:

Get 'em when & if you can people!

JT191 · Post by **JT191** » Tue Feb 05, 2013 3:54 am

http://www.scottsoldautorubber.com.au/catalogue.htm

1968GT · Post by **1968GT** » Tue Feb 05, 2013 8:20 am

Thanks JT, some very close examples there!!
Dave M.

oz_toffa · Post by **oz_toffa** » Tue Feb 05, 2013 8:25 am

that would be great, thanks Geoff. Would prefer 2 so i can do a 2 up mold.

do you want to wait and see if any of those from website are suitable or just send them anyway?

PM me for details.

Cheers

OZ

PR95 · Post by **PR95** » Tue Feb 05, 2013 10:00 am

I got one out today, can get a second one ok, those Chevy ones all look like they are close to them.

Your Call

Geoff

PR95 · Post by **PR95** » Tue Feb 05, 2013 10:07 am

I just checked the site for mob that JT sent, and they list bonnet stop for Bellett
Bonnet bumps - have to be trimmed 12 232.006 no price, any one down south able to check the out?

Cheers Geoff

Marvo · Post by **Marvo** » Wed Feb 06, 2013 2:57 am

I have a 1967 Bellett.
I contacted Scotts Old Auto Rubbers last week as Isuzu Bellett listed on web site for rubber part 232.006 (see pics in above posts) but they don't look like what I have!
Emailed them and got this reply

:

232.006 $1.76 each x 12 + post $6.60. No idea if need trimming, see at,

http://www.scottsoldautorubber.com.au/grommets30.gif

Thankyou,

Scott.
Website says need trimming but Scott doesn't know

I don't know if they fit and postage cost! :roll:

Anyone in melbourne follow up please

Also I'm looking for the two rubber top rests where bonnet seals when shut, plus those two rubbers behind that on the chassis.

Also looking for two boot lid rests rubbers.

BULLITT · Post by **BULLITT** » Wed Feb 06, 2013 3:26 am

HEY MARVO ONE OF THE NEW BOYS ON THE BLOCK NICE TO HEAR FROM YOU HOW ABOUT SOME PICS OF YOUR CAR? AND DO YOU NEED OTHER BITS AND WHAT STATE ARE YOU IN.. ... WELL BY YOUR PHOTO THE CORRECT STATE .....AND A GOOD RED AT THAT ..LETS HEAR MORE FROM YOU CHEERS DAVO

Marvo · Post by **Marvo** » Wed Feb 06, 2013 3:36 am

Hey Davo
Thanks for the welcome 8-)

I'm in Sydney NSW and had a lot of support to date from 1968GT aka dave M....

I'll post some of my photos of car in appropriate section soon, but still needs some finishing work :lol:

I'll post more parts I'm looking for in the Wanted section.

I'm in the wine business so hence the avatar "LOOK" :roll:

It's actually a picture of me, the face painted on a Green Lipped Mussel shell, and rest on canvas. :lol:

Enough about me, back to Bellett

Marvo :mrgreen:

gt 161 · Post by **gt 161** » Wed Feb 06, 2013 11:08 am

I might be going past scotts next week I have some new ones so will take with me and compare will let you know regards Peter

oz_toffa · Post by **oz_toffa** » Wed Feb 06, 2013 11:23 am

Good man Peter. will hold off doing molds till we know if there is a good match.

Cheers

OZ

Post by **PR91** » Thu Feb 07, 2013 12:15 am

lads....
there's one for a Chyrsler Royal that's so close to exactly the same that it doesn't matter.
most car rubber joints have them, and they're worth nothing.
i put them in my Wasp years ago when i resto'd it.
my GT has LC-LJ Torana ones. they are a round pad sort of thing, without the little vertical piece. again, easy to get and worth nothing.

bellett.net

Isuzu Belletts, Wasps, Bellells, Florians, GTs all here

BELLETT bonnet wedges.

BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.

Re: BELLETT bonnet wedges.