another barn find

gt orphanage · Post by **gt orphanage** » Sun Feb 02, 2014 4:46 am

The engine bay with no bling

as we a trying to leave it period.

gt orphanage · Post by **gt orphanage** » Sun Feb 02, 2014 4:52 am

After it's 1st run and a little drive confirmed the diff issue. pinion bearing shagged so before the hoist I gave him a bubble bath and a light cut and polish. It needs another polish and some areas need a little more rubbing. But the diff is more important at this stage.

Stickman · Post by **Stickman** » Sun Feb 02, 2014 5:29 am

That mesh stone guard has to stay!
That's ROCK N ROLL right there :mrgreen:

KJB · Post by **KJB** » Sun Feb 02, 2014 5:36 am

Looks good , another quality Qld. Isuzu. (the increase in the number of quality 1960's Isuzu being restored and or preserved in Australia over the last 6 or so years is amazing ....I do not think it could be matched by any other country .............Japan maybe ?
KB

1968GT · Post by **1968GT** » Sun Feb 02, 2014 5:51 am

You are a lucky man Greg, that is definitely the same model I had, mine purchased September 1969.
I panicked and sold it for a Datsun 1600 when the purchase was announced by GMH of 1/3 of Isuzu and the imported Bellett and Florian was to cease, the worst thing I have ever done.

Good luck to you, keep it standard and look after it, she is a beauty!!

Dave.

Farmer · Post by **Farmer** » Sun Feb 09, 2014 11:32 am

Greg mate, I like it. I like it a lot. That stone guard is uuuug-leeee, but yeah, period. Weather shield, wiper aids, its ole bloke spec, but soo nice. You have a unique car, the only other one I know of is the unresto that surfaced last year. Thats rare!
Great job on the quick tidy up, and yeah, amazing how many little variations between engine aplications.

Thanks for showing, and please never sell it to anyone but me!!
Cheers, Matt.

Farmer · Post by **Farmer** » Sun Feb 09, 2014 11:36 am

Is t,here a steering column cover missing? Got one if you need it.
Cheers,Matt.

gt orphanage · Post by **gt orphanage** » Sun Feb 09, 2014 11:44 am

Don't start saving yet Matt :oops:

I don't sell anything except Rolie and even then I got cold feet

Nah I just collect and build bigger sheds. My small shed has a slab poured and due for modification it will fit 3 gt's 3 sedans 2 wasps and 1 florian. Currently it stores 3gt's and 1 wasp.

gt orphanage · Post by **gt orphanage** » Sun Feb 09, 2014 11:51 am

Farmer wrote:Is t,here a steering column cover missing? Got one if you need it.
Cheers,Matt.

I have it thanks Matt it had a tacho fitted that was messy wires every where so I have removed it for now just haven't refitted it yet. The spotties need wiring to s it was a mess so I cut it out too.

Farmer · Post by **Farmer** » Mon Feb 10, 2014 12:02 pm

gt orphanage wrote:Don't start saving yet Matt I don't sell anything except Rolie and even then I got cold feet Nah I just collect and build bigger sheds. My small shed has a slab poured and due for modification it will fit 3 gt's 3 sedans 2 wasps and 1 florian. Currently it stores 3gt's and 1 wasp.

Thats what I like!! No good selling them, defeats the purpose of buying them! Theres always room for one more, or you build MORE room.

Cheers, Matt.

gt orphanage · Post by **gt orphanage** » Wed Apr 02, 2014 4:03 am

Thank you Mr Grice and bellett net. Flori's Diff was F..... rrrrm not much good. Gricey answered a call for help and the conversation went I can send you a new diff centre :!:

phew

But I need da'da'da I said I can send that for you at the same time another belletter was in desperate need for a part I was not able to help with and Gricey saved him too.
Flori got a new exhaust yesterday and the seats were restuffed as the foam had failed they were refitted and it is now on full rego and just completed a 50km road trip with a little carby issue as the needle and seat stick now and then. Other than that she ran sweet.
Thanks again Gricey and without the forum the world is a small place when you need parts.
Flori is still butt ugly :oops:

gricey · Post by **gricey** » Wed Apr 02, 2014 5:18 am

Thank you Greg it's a two way street . She might be but ugley . But I realY do enjoy driving my flow . Gricey

gt orphanage · Post by **gt orphanage** » Wed Apr 02, 2014 9:15 am

Its not to bad to drive. Its quite comfy too. I would hate to go into a corner too hard :shock:

it might be a handfull :lol:

GTtoo · Post by **GTtoo** » Wed Apr 02, 2014 10:20 am

Hawh, you just getting as soft as Florian shocks, mate.

But where do ya keep on finding these gems :lol:

And you're a gentlman Gricey 8-)

mrflibbles · Post by **mrflibbles** » Wed Apr 02, 2014 10:46 am

i love driving my florian, and the corners arent too much of a worry! just turn the wheel and hang on!
great to hear shes on the road now!

Farmer · Post by **Farmer** » Fri Apr 04, 2014 12:01 pm

Excellent news mate, and good onya Gricey for coming to the rescue, as you do.
I don't get the ugly comment though.

I must have different eyes, I've liked them since I first saw them.
But I like some unusual cars. I like ones that don't look like everything else. I don't like plain cars, like ht holdens.

Ugly? Thats the Ssangyong stavic (ugh).
And the new oddysey, and barina spark, and Jeep patriot, and those pig dog ugly Rolls royces.(erk!)

Pretty? Thats Veloster, Toyota 86, Murano, Maxima, ......even Skoda Octavia! And anything japanese before1973.

Cheers, Matt.

gricey · Post by **gricey** » Fri Apr 04, 2014 8:49 pm

I thaught my florian was ugley till I lowered it . Now corners are something you go around . Gricey

PR95 · Post by **PR95** » Fri Apr 04, 2014 11:37 pm

[quote="gricey"]I thaught my florian was ugley till I lowered it . Now corners are something you go around . Gricey[/quote
YES BUT,
Gricey you have been driving Trucks for a long time. :roll:

Farmer · Post by **Farmer** » Sat Apr 05, 2014 9:59 am

I like the way Aunty Mary leans. Last time I was at Eastern Creek, we all went out for the two parade laps. I took Rod 50 bells and his Dad, and another Florian owner from back in the day. Following Gary Carter's 117, which just sits flat, I was keen to stay with him. They're long corners, and she leeeeeeeeeaned and swaaaaaaayed, and I reckon only just stayed upright, so I says to them, "Wow, she sits nice n flat with all you fellas in here!"

Yeah, its like a matress, but thats part of the experience![i] :lol:

Now if I found a TS, that would be different! Dumpt to the weeds!

Cheers, Matt.

gt orphanage · Post by **gt orphanage** » Sat Apr 05, 2014 10:12 am

Flori has a rear sway bar fitted the week after it was new. Warwick traded his 64 bellett on flori and was :shock:

at the way it handled. He said it made a ton of difference. I found flori to drive quite nice floaty yes, but it went where I wanted it to go and quite cruisey. I think if you hooked into a unsuspecting corner a little quick :shock:

might end up like this

bellett.net

Isuzu Belletts, Wasps, Bellells, Florians, GTs all here

another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find

Re: another barn find