Whole assembly, so lens, casting, brackets, fasteners. I was eyeing off some GT-R lights on Yahoo until I realised they were completely different.
Davo noted the driving lights are identical to some Hillman offered (likely across the Rootes range) and I'm yet to chase up that as a lead. If I can find some without having them remade, great! If not, I may not have a choice...at least I will be forced to make multiples, so can offer to others.
WTD: PR91 GT Parts
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
degruch wrote:Whole assembly, so lens, casting, brackets, fasteners. I was eyeing off some GT-R lights on Yahoo until I realised they were completely different.
Davo noted the driving lights are identical to some Hillman offered (likely across the Rootes range) and I'm yet to chase up that as a lead. If I can find some without having them remade, great! If not, I may not have a choice...at least I will be forced to make multiples, so can offer to others.
didn't realise they differed. But i would think GT-r type would be close enough although finding some to model from might be an issue
'72 PR60 Sport
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
The GT-R type appear different in every way, from what I can see...they're bigger, different lens, brackets and general assembly. I'll see if I can find a pic.
Of course, being mounted to the front bumper of the car, most of them likely perished in the first car park bump!
Of course, being mounted to the front bumper of the car, most of them likely perished in the first car park bump!
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
New request...
...does anyone have a radiator shroud? Visited Oz today and spotted one for the first time. As per usual (so I'm told) mine is missing...I'd love one to keep my GT original.
Cheers!
...does anyone have a radiator shroud? Visited Oz today and spotted one for the first time. As per usual (so I'm told) mine is missing...I'd love one to keep my GT original.
Cheers!
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
degruch wrote:New request...
...does anyone have a radiator shroud? Visited Oz today and spotted one for the first time. As per usual (so I'm told) mine is missing...I'd love one to keep my GT original.
Cheers!
Duane, i guess you mean the 'rounded' type. I have one here that is square..... ie square or sharp not rounded corners all round. I am not certain what model it comes from though.
'72 PR60 Sport
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
Cheers Glenn, looks like this one...
- Attachments
-
- Bellett Radiator Shroud.jpg (13.97 KiB) Viewed 29193 times
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
degruch wrote:Cheers Glenn, looks like this one...
no, the spare i have is a square type..... possibly very early Bellett ? Just don't know.
'72 PR60 Sport
Re: WTD: PR91 GT Parts
mate I have a spare surround its the same as the one I took off 90 I will photo and pm to you camera is out of action at moment cheers davo if its the one ?? can we say a lazy $100 (joking) its yours you pay post cheers davo
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
Davo...you continue to be astounding! PM me your bank details and I'll sling some money in your direction. My postcode is 5014, if you need it to work out postage.
-
1968GT
- Posts: 1266
- Joined: Tue Dec 23, 2008 2:32 am
- Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
- Location: MUDGEE. NSW
Re: WTD: PR91 GT Parts
I have never seen a square radiator shroud, is there such an animal?? 
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!
Re: WTD: PR91 GT Parts
was the purple car shot barney from nz??? cheers davo
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
BULLITT wrote:was the purple car shot barney from nz??? cheers davo
Just found it on the 'net Davo, so not sure.
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
1968GT wrote:I have never seen a square radiator shroud, is there such an animal??
Its formed up from flat sheet, Dave. I have seen one before but unsure just what its off..... appears to be Bellett mount holes. It came with the spare sport parts
- Attachments
-
- My Sport_021114_ 015.jpg (100.78 KiB) Viewed 29152 times
'72 PR60 Sport
Re: WTD: PR91 GT Parts
is this it ??? no sorry mate not the black ne the daggy ..but will come up ok rusty cloured one ...gt owners is this the right cowl ..if it is it will go to south aussie cheers davo
- Attachments
-
- DSCF3113.JPG (207.78 KiB) Viewed 29138 times
-
- DSCF3112.JPG (206.42 KiB) Viewed 29138 times
-
- DSCF3111.JPG (207.45 KiB) Viewed 29138 times
-
- DSCF3110.JPG (205.91 KiB) Viewed 29138 times
-
- DSCF3109.JPG (204.74 KiB) Viewed 29138 times
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: WTD: PR91 GT Parts
There's no GT experts on here Davo, you know that! 
Looks the same as Oz's sedan.
Looks the same as Oz's sedan.-
Farmer
- Posts: 2591
- Joined: Tue Oct 28, 2008 12:17 pm
- Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
- Location: Rye Park, N.S.W.
Re: WTD: PR91 GT Parts
From my observations, GTs have the same cowl as sedans. They were fitted from the first sedans up to the 1968 model year, but deleted on strip taillight models. Then they had no cowl or just a small 'finger stopper' at the top, the same as Florians. I believe the cowl makes cooling more efficient at town speeds. So, why was it deleted? Probably a weight saving!
As for the square one, I don't know where it belongs, but it is rather unattractive, IMHO. Looks flatter, so perhaps it is for a model with radiator closer to the motor?
Cheers, Matt.
As for the square one, I don't know where it belongs, but it is rather unattractive, IMHO. Looks flatter, so perhaps it is for a model with radiator closer to the motor?
Cheers, Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
Re: WTD: PR91 GT Parts
sounds like the one ....will take it off the radiator this avo then box it up ...pm me your details cheers davo
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
Farmer wrote:
As for the square one, I don't know where it belongs, but it is rather unattractive, IMHO. Looks flatter, so perhaps it is for a model with radiator closer to the motor?
Cheers, Matt.
yes its thin...... and ugly !
'72 PR60 Sport
-
1968GT
- Posts: 1266
- Joined: Tue Dec 23, 2008 2:32 am
- Car(s): 1968 PR91 Bellett GT. 2014 ISUZU MU-X, 2016 Jayco 22' Starcraft Caravan, 2013 KIA Reo shopping trolley!!
- Location: MUDGEE. NSW
Re: WTD: PR91 GT Parts
WOW, that is a strange and ugly one Glenn Eh? 
First time I have seen one, is it possible it was hand made by a person unknown in Japan??
First time I have seen one, is it possible it was hand made by a person unknown in Japan??
BELLETT GT, BELLETT SEDAN, MU-X, D MAX, or ANY ISUZU, or A FORD XR6 TURBO, Premium motoring!!!!
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: WTD: PR91 GT Parts
1968GT wrote:WOW, that is a strange and ugly one Glenn Eh?
First time I have seen one, is it possible it was hand made by a person unknown in Japan??
even though its ugly, it appears factory made.
My Sport has no shroud but it does have a fan guard over the top of (thermo) fan thats welded onto the radiator top tank.
'72 PR60 Sport