bellett.net

Hi Guys I am looking for a pair of 1.5" S.U's for my Bellett. I was under the impression that all S.U's were the same except for the size How wrong was I!!

As far as I can work out from my limited time Googling I need a pair of HS2 1.5" S.U's. Any more info would be great if there are any experts out there.

Here are a few pics of the manifold I will be using them on







At the moment I am running a Lynx X-over manifold with a 45 Weber on it. I was told by the guy that did the dyno tuning on my car that it is a pretty poor design as they don't flow very well.



So if you have a pair of S.U's that will fit hanging around in the shed or can recomend some one who might be able to help me out that would be great. I have rang a couple of companies out of the Yellow pages and haven't had much luck. Also if you have used one of these manifolds before I would love to get some thoughts.

Cheers

could try a wrecker that does pommy cars, alot of pommy cars ran su's.

I might be getting a bit old and hazey, but I thought the Lynx Bellett manifold were designed to take inch and a quarter SU. Sorry don't have any.

I know that feeling.
Slowly looking for parts for mine

I've lost the link but yes try the UK for parts.
Some even have exploded views so you can see what you looking for.

Cheers
Rob

Hay Gav you sold me a pair of 1 /2's a couple of years ago on a datto manifold you can have them back call me on 0407511597