isuzu G200w and G200
isuzu G200w and G200
does the g200 use the same crank and conrods as a g200w
-
bellett65
- Posts: 156
- Joined: Sun Oct 12, 2008 7:14 am
- Car(s): Isuzu DMax LSU, Isuzu MUX, 1979 117 Coupe.
- Location: Cranbourne Victoria
Re: isuzu G200w and G200
In a word NO.
Since the day of my birth, my death began its walk. It is walking towards me, without hurrying
-
tobytj
- Posts: 7
- Joined: Mon Jul 17, 2017 3:00 am
- Car(s): Geminis, TC, TD, TF and oldest TX coupe still on the road.
Re: isuzu G200w and G200
I hate that my first post on this site is a query of someone elses opinion, but I am pretty sure G200Z, G180Z and G200W cranks are identical.
I put a G200W crank and G180Z crank side by side on the weekend and could not pick a difference. I would only know definitely if I bolted one up.
The only difference I could see is the fitting on the pully end. A Z motor has a worm gear to drive the oil pump, single row timing gear and a short pulley boss. A W engine is fitted with a double timing chain gear and a long pulley boss. But these bits are interchangeable.
Rods I don't know.
I put a G200W crank and G180Z crank side by side on the weekend and could not pick a difference. I would only know definitely if I bolted one up.
The only difference I could see is the fitting on the pully end. A Z motor has a worm gear to drive the oil pump, single row timing gear and a short pulley boss. A W engine is fitted with a double timing chain gear and a long pulley boss. But these bits are interchangeable.
Rods I don't know.