Hi folks,
I have just bought a heap of Bellett sedan spare parts.( I was only just after 1 door .... ). If anyone needs any parts,bits & pieces,etc let me know and I will take them to Merimbula .
I won't be taking the heavier stuff like motors / gearboxes,but can bring the lighter stuff in my ute ( sorry not a Wasp, a BA Falcon).
I will be bringing some stuff anyway,and I am still sifting through it all,but looks mainly later '67 era Bellet stuff.
There are engine parts/suspension /windscreens/brake parts.Also got some body panels,interior stuff,etc
Also got motors and 4 manual speed gearboxes,1 auto box
There are tons of it,and gotta shift some of it ,so going cheap.
Cheers,Rod
Bellett sedan parts for Merimbula
-
50 Bells Bellett
- Posts: 76
- Joined: Fri Mar 02, 2012 12:08 pm
- Car(s): 2x 1964/5 ' Teardrops' & 1967 Bellett &too many Valiants
- Location: Penrith ,NSW
- redback
- Posts: 524
- Joined: Sun Oct 05, 2008 10:21 pm
- Car(s): Isuzu Bellett, VG Commodore Ute, Custom Chopper
- Location: Darwin NT
- Contact:
Re: Bellett sedan parts for Merimbula
Hey 50,
I am chasing a passenger side dash pad that sits under the glove box if there is one in your "inventory".
Cheers
Neil
Darwin
I am chasing a passenger side dash pad that sits under the glove box if there is one in your "inventory".
Cheers
Neil
Darwin
- bembokabellettbloke
- Posts: 819
- Joined: Mon Oct 27, 2008 10:34 am
- Car(s): not enough!
- Location: Bemboka NSW
- Contact:
Re: Bellett sedan parts for Merimbula
great Rod.......
did u get onto Zak about the door?
seee you at Merimbula!

did u get onto Zak about the door?
seee you at Merimbula!
Gary & Monnica Smith
http://www.facebook.com/BembokaBellettBloke.
http://www.facebook.com/BembokaBellettBloke.
-
50 Bells Bellett
- Posts: 76
- Joined: Fri Mar 02, 2012 12:08 pm
- Car(s): 2x 1964/5 ' Teardrops' & 1967 Bellett &too many Valiants
- Location: Penrith ,NSW
Re: Bellett sedan parts for Merimbula
Hi Gary,
I didn't get around to ringing him,as I was waiting to check out all the panels in the parts stash I just got.
I ended up with 12 Bellett doors!
Luckily there was a white drivers door with the early trim holes,and another (not so good) later Bellett one.
I have his number in case something is amiss with the one I got.Thanks for the help too !
Some are door shells (no glass or reg )& fairly light,so might bring a few to Merimbula.
Rod.
I didn't get around to ringing him,as I was waiting to check out all the panels in the parts stash I just got.
I ended up with 12 Bellett doors!
Luckily there was a white drivers door with the early trim holes,and another (not so good) later Bellett one.
I have his number in case something is amiss with the one I got.Thanks for the help too !
Some are door shells (no glass or reg )& fairly light,so might bring a few to Merimbula.
Rod.
- bembokabellettbloke
- Posts: 819
- Joined: Mon Oct 27, 2008 10:34 am
- Car(s): not enough!
- Location: Bemboka NSW
- Contact:
Re: Bellett sedan parts for Merimbula
great....see you there! 
Gary & Monnica Smith
http://www.facebook.com/BembokaBellettBloke.
http://www.facebook.com/BembokaBellettBloke.
-
Retroasted
- Posts: 230
- Joined: Tue Aug 14, 2012 10:55 am
- Car(s): Isuzu Bellett, Morris Minor 1000
Re: Bellett sedan parts for Merimbula
Any fairly decent eary front and back seats by anychance???
-
50 Bells Bellett
- Posts: 76
- Joined: Fri Mar 02, 2012 12:08 pm
- Car(s): 2x 1964/5 ' Teardrops' & 1967 Bellett &too many Valiants
- Location: Penrith ,NSW
Re: Bellett sedan parts for Merimbula
Only got my old Teardrop ones,but they are junk - ripped, foam and springs hanging out,bent seat rails,and held together with tape.Probably not what you are after!
-
Retroasted
- Posts: 230
- Joined: Tue Aug 14, 2012 10:55 am
- Car(s): Isuzu Bellett, Morris Minor 1000
Re: Bellett sedan parts for Merimbula
Thank you for the offer sounds similar to what is in it 