Hi All,
Anyone know if the Wasps had a compliance plate or where I may find a chassis number on my Wasp?
compliance plate or chassis number location
-
dave
- Posts: 1950
- Joined: Thu Sep 11, 2008 9:15 am
- Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
- Contact:
Re: compliance plate or chassis number location
Heya Robot,
The Wasp has a chassis number stamped on the chassis crossmember located approximately under where the passenger would sit.
I had to attack mine with a wire brush for several minutes to get mine to show up, and mine actually isn't that bad underneath!
They also have a little build plate in the engine bay on the side; can't remember if it's on the driver's or passenger side!
They don't really have much useful info printed there; just the engine and chassis # from memory, as for build date, who knows?!?!
The Wasps were all imported in 1965 I've been told, so it's probably a 1965! FYI there were only 122 of them sold here, so they're a rare beast!
Welcome to the forum!
Cheers,
Dave
The Wasp has a chassis number stamped on the chassis crossmember located approximately under where the passenger would sit.
I had to attack mine with a wire brush for several minutes to get mine to show up, and mine actually isn't that bad underneath!
They also have a little build plate in the engine bay on the side; can't remember if it's on the driver's or passenger side!
They don't really have much useful info printed there; just the engine and chassis # from memory, as for build date, who knows?!?!
The Wasps were all imported in 1965 I've been told, so it's probably a 1965! FYI there were only 122 of them sold here, so they're a rare beast!
Welcome to the forum!
Cheers,
Dave
My latest automotive articles and original content shared here:
https://www.facebook.com/garageofawesome
Street Machine! Unique Cars! Awesome!
https://www.facebook.com/garageofawesome
Street Machine! Unique Cars! Awesome!
-
robot__
- Posts: 15
- Joined: Sat Apr 12, 2014 12:34 pm
- Car(s): Isuzu Wasp, TX Gemini x2, Datsun 1600, MK1 Escort, VE SS Wagon, VZ Wagon, Colorado, Peugeot 206
- Location: WA
Re: compliance plate or chassis number location
Cheers Dave,
I shall grab a wire brush from work today and see how I go
I shall grab a wire brush from work today and see how I go
Bzzzzzz
Re: compliance plate or chassis number location
Reply in your thread in the 'my bellett' section as well.