Hi Guys,
Thought I would create separate topics for each question incase people need to search the forum for it in the future.
I am trying to figure out what size wheels I can fit under the wheel arches of a 1974 Isuzu 117 Coupe PA95 XT (Yes I will keep stock + hub caps in warehouse for certain events). The car came with the original factory hub caps and I measured the current steel rims and they measured +35 offset.
Wheels: Watanabe Type R
Now the rears I wanted to fit the widest 15x8/8.5/9 with +0 Offset if I can as the rear guards are naturally pumped out already. The fronts well thats the headache I think, as with the +35 offset of the stock steelies the wheel literally sits on flush with the guard (attached image to see the difference between the front and rear) and I doubt I can fit 15x7 +20 offset unless the hub & double wishbone can be changed :S
Any info is greatly appreciated as I don't want to order the wrong wheels.
Regards
Pete
What size wheel and offset on a Isuzu 117 Coupe
What size wheel and offset on a Isuzu 117 Coupe
- Attachments
-
- 117_blankedplate.jpg (460.98 KiB) Viewed 28293 times
Re: What size wheel and offset on a Isuzu 117 Coupe
Just realised there is a dedicated wheel section, admins please move if this should under there 
- Stickman
- Posts: 1523
- Joined: Fri Apr 10, 2009 11:29 pm
- Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
- Location: Kallangur, Brisbane QLD
- Contact:
Re: What size wheel and offset on a Isuzu 117 Coupe
A 15x7 wheel with +20 offset should fit no worries as the more positive offset you have, the deeper inside the arch the wheel sits. I you go a +0 offset or a negative offset the wheel will have more dish and sit further out toward the arch.
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au
RUST isn't a crime
www.gartdesign.com.au
- Farmer
- Posts: 2591
- Joined: Tue Oct 28, 2008 12:17 pm
- Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
- Location: Rye Park, N.S.W.
Re: What size wheel and offset on a Isuzu 117 Coupe
Warren, who flagged you down, is a wheel & tyre bloke. I'm sure he would enjoy a test fit with some options. Should be plenty available as they are the same pattern as Datsuns.
I personally wouldnt mess with the wishbones, parts are rare. Please dont think of flaring the guards, those lines are so sweet!
Cheers, Matt.
I personally wouldnt mess with the wishbones, parts are rare. Please dont think of flaring the guards, those lines are so sweet!
Cheers, Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
Re: What size wheel and offset on a Isuzu 117 Coupe
Sorry I meant I wanted to roll the guards , the inner lip for more clearance
- Asroc66
- Posts: 428
- Joined: Tue Jun 18, 2013 5:09 am
- Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
- Location: Sydney NSW
Re: What size wheel and offset on a Isuzu 117 Coupe
Check out these Bad Boys
Wantanabe's 14 x 6
http://www.ebay.com.au/itm/WATANABE-RIM ... 1a01f05668
J
Wantanabe's 14 x 6
http://www.ebay.com.au/itm/WATANABE-RIM ... 1a01f05668
J
To increase the fun, add a hair dryer
Re: What size wheel and offset on a Isuzu 117 Coupe
$2400 for a second hand set?
They are cheaper new
They are cheaper new
- Asroc66
- Posts: 428
- Joined: Tue Jun 18, 2013 5:09 am
- Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
- Location: Sydney NSW
Re: What size wheel and offset on a Isuzu 117 Coupe
Surely not!!!!!!
I read it as $680 per set of 4....
Did u email the dude?
I know you pay for the name but if you are right that's just crazy.
They are the period mags to have..... Would love a set that's for sure
J
I read it as $680 per set of 4....
Did u email the dude?
I know you pay for the name but if you are right that's just crazy.
They are the period mags to have..... Would love a set that's for sure
J
To increase the fun, add a hair dryer
- Farmer
- Posts: 2591
- Joined: Tue Oct 28, 2008 12:17 pm
- Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
- Location: Rye Park, N.S.W.
Re: What size wheel and offset on a Isuzu 117 Coupe
Surely its $680 for the set, though there is a 1 in the quantity box. Not a pleasant seller by the blurb.
I'm not a fan of black wheels, but to each his own.
There are heaps of choices that would fit under the stock guards.
Cheers, Matt.
I'm not a fan of black wheels, but to each his own.
There are heaps of choices that would fit under the stock guards.
Cheers, Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
Re: What size wheel and offset on a Isuzu 117 Coupe
Couldn't resist new badges are my weak spot.
- Attachments
-
- Screen Shot 2015-07-06 at 8.52.03 pm.png (288.09 KiB) Viewed 28169 times
-
- Screen Shot 2015-06-26 at 11.46.25 pm.png (343.22 KiB) Viewed 28169 times
-
- Screen Shot 2015-06-26 at 11.45.32 pm.png (406.71 KiB) Viewed 28169 times
- Stickman
- Posts: 1523
- Joined: Fri Apr 10, 2009 11:29 pm
- Car(s): 3x1965 PR20(Donkey, Jenny n Bundy) 1 1969 PR20(Percy) 2 1968 PR20(Eugine n GT Donor) 1 1968 PR91 GT, 1 1965 Wasp
- Location: Kallangur, Brisbane QLD
- Contact:
Re: What size wheel and offset on a Isuzu 117 Coupe
VERY nice 
1xB+1xE+2xL+1xE+2xT=BELLETT
RUST isn't a crime
www.gartdesign.com.au
RUST isn't a crime
www.gartdesign.com.au