Now that the Toowoomba Nats is done and dusted, its time to focus on the Jobs To Do list and number 1 priority is getting Crash back on the road.
With only 24 hours in a day I figure 30 minutes is enough to do a bit every day.
So far I've:
Removed boot lid and hinges
Removed totally mangled tail light with the help of Lumpy the 2 pound hammer
Removed good tail light and stored away
Removed the rear bumper with the help of the crowbar
Tucked away the rear wiring after extracting it from layers of metal squashed together (again crowbar came in handy).
Just awaiting some information from various sources as to best option for panel work.
Pics to follow.
Crash's rebuild
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: Crash's rebuild
Bring on the pics! 
-
Gunna
Re: Crash's rebuild
Here goes;
This is a pic of inside the boot (for those who don't recognise it
).
Spare wheel was jammed in pretty damn tight, so after it was completely deflated and with a little prizing from the 6 foot crowbar it finally popped out.
The fuel tank flange (were the two parts are joined together and bolted down) was slightly bent. It'll survive ok.
The actual subframe or rear bulkhead (inside guards, a frame support pieces, rear seat bulkhead, etc) area is untouched. Just all the rear panelwork needs replacing.
The outside panels forward of the rear of the quarter glass should "de-stress" after it gets a stretch on the rack or the rear panels get cut off.
No doubt a lot of work, but that'll be done by someone who knows their stuff (hopefully).
Happy to read/listen to any advice that people may offer. PM's welcomed if commenting in public isn't your thing.
This is a pic of inside the boot (for those who don't recognise it
Spare wheel was jammed in pretty damn tight, so after it was completely deflated and with a little prizing from the 6 foot crowbar it finally popped out.
The fuel tank flange (were the two parts are joined together and bolted down) was slightly bent. It'll survive ok.
The actual subframe or rear bulkhead (inside guards, a frame support pieces, rear seat bulkhead, etc) area is untouched. Just all the rear panelwork needs replacing.
The outside panels forward of the rear of the quarter glass should "de-stress" after it gets a stretch on the rack or the rear panels get cut off.
No doubt a lot of work, but that'll be done by someone who knows their stuff (hopefully).
Happy to read/listen to any advice that people may offer. PM's welcomed if commenting in public isn't your thing.
- Attachments
-
- image.jpg (1.97 MiB) Viewed 35475 times
Last edited by Gunna on Tue Oct 13, 2015 8:27 am, edited 1 time in total.
-
gt orphanage
- Posts: 1813
- Joined: Fri Mar 20, 2009 8:23 am
Re: Crash's rebuild
have a look at ol yella posts you will see it cut down it was hit harder than that.
-
Gunna
Re: Crash's rebuild
Movement at last, Crash is off to a repairer early next week with her half cut from Peter A.
- Farmer
- Posts: 2591
- Joined: Tue Oct 28, 2008 12:17 pm
- Car(s): Doris, AuntyMary, Shrek, Jimmy; GT, Wasp, Flo & Sed unrestos; 65 Elf; 82 Rodeo, 60 TX550, 72 Sport, & a Sigma.
- Location: Rye Park, N.S.W.
Re: Crash's rebuild
Great you are into it already. Nice when a long saved part is put to good use, and a rare little car gets to cruise again.
Cheers, Matt.
Cheers, Matt.
Life is far too short not to fill it with what you love. - Jackie French.[/size]
- dave
- Posts: 1950
- Joined: Thu Sep 11, 2008 9:15 am
- Car(s): 1965 Wasp, 1966 Bellett, 1967 Bellett, 1969 Florian, 1973 Bellett GTR, 1976 Buick Opel by Isuzu, 1978 Gemini van
- Contact:
Re: Crash's rebuild
Hey Gunna,
Hope to see Duane's old baby on the road before too long!
Was sure it was a 'goner', but perhaps not!
Too many sectional repairs for the insurance company, but nothing is impossible with time, skills and tenacity...or money if you have none of the above!!
Good luck with it...Will we see it at Albury-Wodonga?
Luckily it doesn't need much else outside of the body repairs; from memory I think even the tail lights survived, yeah?
Cheers,
Dave
Hope to see Duane's old baby on the road before too long!
Was sure it was a 'goner', but perhaps not!
Too many sectional repairs for the insurance company, but nothing is impossible with time, skills and tenacity...or money if you have none of the above!!
Good luck with it...Will we see it at Albury-Wodonga?
Luckily it doesn't need much else outside of the body repairs; from memory I think even the tail lights survived, yeah?
Cheers,
Dave
My latest automotive articles and original content shared here:
https://www.facebook.com/garageofawesome
Street Machine! Unique Cars! Awesome!
https://www.facebook.com/garageofawesome
Street Machine! Unique Cars! Awesome!
-
degruch
- Posts: 769
- Joined: Mon Nov 24, 2008 7:50 am
- Car(s): Peugeot 206 GTi 180, Ford Fiesta, Bond Equipe 2-Litre GT, Mazda R360 Coupe, Nissan CSP-311 Silvia. PAST: Bellett 1600GT
Re: Crash's rebuild
Anything new to report re: Crash, Dean?
-
Gunna
Re: Crash's rebuild
Nothing to report. She just lives the life of luxury tucked away in bed at the back of one the forty footers.
- Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
- Contact:
Re: Crash's rebuild
Hopefully not like this .......https://www.youtube.com/watch?v=qCK7N2SgJjEGunna wrote:Nothing to report. She just lives the life of luxury tucked away in bed at the back of one the forty footers.
'72 PR60 Sport