Page 1 of 1
WANTED
Posted: Mon Nov 09, 2015 8:06 am
by BULLITT
The journey continues anyone got any decent (good uncracked) rubbers that hold in the bumpers off the body surely someone has 4 spare good ones I have bits to swap cheers davo
Re: WANTED
Posted: Mon Nov 09, 2015 11:38 am
by Farmer
Why do you need 4 mate? There is only one on each side at the back.
Just curious,
Matt.
Re: WANTED
Posted: Mon Nov 09, 2015 12:17 pm
by BULLITT
sorry matt im not clear I don't mean the little bumper stops on the gt I mean the rubber plugs that go into the front valance and the rear beaver and the bumper bar brackets slip through them ....I cant get a photo on here ...do you know what I mean about 65mm long cheers davo
Re: WANTED
Posted: Mon Nov 09, 2015 12:41 pm
by BULLITT
back again just looked theres none on rear just 2 on the front valance sorry guys
Re: WANTED
Posted: Mon Nov 09, 2015 12:59 pm
by BULLITT
the square holes
Re: WANTED
Posted: Mon Nov 09, 2015 7:43 pm
by Stickman
There's supposed to be a rubber in there??
None of my cars do......... I'll have 12 then please
Re: WANTED
Posted: Mon Nov 09, 2015 8:44 pm
by BULLITT
maybe someone can make these for the front pan they originally would have squeezed in now they are old and brittle bit like me
Re: WANTED
Posted: Mon Nov 09, 2015 10:06 pm
by gt orphanage
I get mine from the rubber shop they are a tail gate check strap rubber. I think valiant or holden ute? I cant remember. If you send a photo they will know.
Re: WANTED
Posted: Tue Nov 10, 2015 1:47 am
by BULLITT
thanks guys will chase up .....guess its only a small thing but all helps cheers davo
Re: WANTED
Posted: Tue Nov 10, 2015 5:23 am
by Gunna
Re: WANTED
Posted: Tue Nov 10, 2015 11:31 am
by gt orphanage
The slot is angled in the rubbers that he has but they square up when fitted.
Re: WANTED
Posted: Tue Nov 10, 2015 11:35 am
by BULLITT
thanks greg wondered why the angle .... were they holden I looked on scotts site you told me once one thing at a time ...im taking heed cheers davo