G180 W mls Head Gaskets

General engine, transmission or drive line questions including tuning questions for all engine types
Post Reply
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

G180 W mls Head Gaskets

Post by flying »

Hi Guys

I am ordering an MLS Head Gasket from Thomas 4 Parts

He can get them made up takes 1 month $265 plus postage

The only other Gasket set kit I could and have got is from MDS Gaskets in Melbourne but this is for the G200 W and the only difference is the Graphite Head Gasket to suit the 87 mm Bore.

Anyone interested in ordering a MLS Gasket ???

Minimum order is 2

Thomas 4 parts website:

http://thomas4parts.com/

Regards
Flying
User avatar
Glenn
Posts: 2826
Joined: Tue May 10, 2011 2:23 am
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Location: Melb.
Contact:

Re: G180 W mls Head Gaskets

Post by Glenn »

flying wrote:Hi Guys

I am ordering an MLS Head Gasket from Thomas 4 Parts

He can get them made up takes 1 month $265 plus postage

The only other Gasket set kit I could and have got is from MDS Gaskets in Melbourne but this is for the G200 W and the only difference is the Graphite Head Gasket to suit the 87 mm Bore.

Anyone interested in ordering a MLS Gasket ???

Minimum order is 2

Thomas 4 parts website:



http://thomas4parts.com/

Regards
Flying
Not sure if i am right here.... i think the Bellett 1800SOHC gasket can be used on the DOHC engine? Chev Luv are often available on ebay if you only need head gasket. This one does not have the section around the cam chain area, but it supplied as a separate gasket i think.
Attachments
G180_SOHC_head_gasket_ 001.jpg
G180_SOHC_head_gasket_ 001.jpg (110.55 KiB) Viewed 19827 times
G180_SOHC_head_gasket_ 002.jpg
G180_SOHC_head_gasket_ 002.jpg (103.45 KiB) Viewed 19827 times
'72 PR60 Sport
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

Re: G180 W mls Head Gaskets

Post by flying »

Hi Glenn

That Gasket looks different

Heres a picture of mine compared to a copy of yours -- shold have put some white paper underneath for better contrast

Quick Question -- are the sohc Heads only 8 bolts?

Regards Flying
Attachments
004.JPG
004.JPG (159.44 KiB) Viewed 19793 times
User avatar
Glenn
Posts: 2826
Joined: Tue May 10, 2011 2:23 am
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Location: Melb.
Contact:

Re: G180 W mls Head Gaskets

Post by Glenn »

there seem to be some differences in hole size mainly ? Although, two extra holes also

The LUV seems to have an 'odd' shape (not circle) around the bores, yours does not.

I have another LUV SOHC gasket here also which has the 'extension' for the timing chain area.

Afraid I don't know how many bolt holes are used.
Attachments
G180_SOHC_head_gasket_.jpg
G180_SOHC_head_gasket_.jpg (37.46 KiB) Viewed 19789 times
'72 PR60 Sport
User avatar
Asroc66
Posts: 428
Joined: Tue Jun 18, 2013 5:09 am
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Location: Sydney NSW

Re: G180 W mls Head Gaskets

Post by Asroc66 »

They Should be interchangeable
Readily available from USA but very high postage
Cheers
J

To increase the fun, add a hair dryer
User avatar
Glenn
Posts: 2826
Joined: Tue May 10, 2011 2:23 am
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Location: Melb.
Contact:

Re: G180 W mls Head Gaskets

Post by Glenn »

Asroc66 wrote:They Should be interchangeable
Readily available from USA but very high postage
Cheers
J
yes they are, the one without the 'extension' has a separate gasket supplied.

Post is expensive sometimes but one one of them i got lucky and paid < $20
'72 PR60 Sport
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

Re: G180 W mls Head Gaskets

Post by flying »

The SOHC Gaskets look close but no banana
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

Re: G180 W mls Head Gaskets

Post by flying »

Heres some pictures

Two of the Early Blue Top Twin Cam

and two of a Green Top

Glenns SOHC almost fits the Green Top except for an extra hole required top left but does not fit the blue top which is very similar to the red top G200 W

Green top head is different again with extra water on the Intake side of the head

Regards Flying
Attachments
Green Top Intake.jpg
Green Top Intake.jpg (160.72 KiB) Viewed 19763 times
Blue Top Intake Resized.jpg
Blue Top Intake Resized.jpg (149.36 KiB) Viewed 19763 times
Green Top Resized.jpg
Green Top Resized.jpg (134.23 KiB) Viewed 19763 times
Blue Top Head resized.jpg
Blue Top Head resized.jpg (140.53 KiB) Viewed 19763 times
User avatar
Asroc66
Posts: 428
Joined: Tue Jun 18, 2013 5:09 am
Car(s): PR91 1967 GT, PR20 1966 1/2 with GT Goodies
Location: Sydney NSW

Re: G180 W mls Head Gaskets

Post by Asroc66 »

Hi
Thanks for the heads-up
Another Myth Busted
Cheers
J

To increase the fun, add a hair dryer
Post Reply