g200w or g180w dipstick
-
Waldo
- Posts: 194
- Joined: Tue Oct 21, 2008 7:12 am
- Car(s): 1968 Bellett GT
- Location: Brisbane
g200w or g180w dipstick
hey guys im after a g200w or g180w dipstick if anyone has one spare. thanks
-
PR91
- Posts: 2521
- Joined: Tue Sep 16, 2008 11:54 am
Re: g200w or g180w dipstick
Depends on what sump and dip stick tube you have.... there were 2 or 3 different ones.
-
Waldo
- Posts: 194
- Joined: Tue Oct 21, 2008 7:12 am
- Car(s): 1968 Bellett GT
- Location: Brisbane
Re: g200w or g180w dipstick
I have this type sump. Or does anyone know what other dipstick would fit this sump? One i could cut down to suit that will just fit the tube
You do not have the required permissions to view the files attached to this post.
-
flying
- Posts: 259
- Joined: Mon Nov 15, 2010 3:11 am
- Car(s): 1967 GT Bellett
- Location: Adelaide
Re: g200w or g180w dipstick
Waldo
That sumps looks similar to mine
I will have a look tomorrow night
i do not have a spare but i will take a photo, measure it etc
Cheers Flying
That sumps looks similar to mine
I will have a look tomorrow night
i do not have a spare but i will take a photo, measure it etc
Cheers Flying
-
PR91
- Posts: 2521
- Joined: Tue Sep 16, 2008 11:54 am
Re: g200w or g180w dipstick
Try a Gemini stick. I think the rubber sleeve is the same size and the length should be close. A tape measure will confirm or deny.
But make sure it's the same style Gemini sump.... because they had a couple of different ones as well.
But make sure it's the same style Gemini sump.... because they had a couple of different ones as well.
-
flying
- Posts: 259
- Joined: Mon Nov 15, 2010 3:11 am
- Car(s): 1967 GT Bellett
- Location: Adelaide
Re: g200w or g180w dipstick
Waldo
The Dipstick is 300 mm long from the tip of the stick to the inside base. The high and low marks are 15 mm and 40 mm from the tip.
The blade looks about 5 mm wide and the stopper is about 8mm in diameter.
Hope this Helps
Flying
The Dipstick is 300 mm long from the tip of the stick to the inside base. The high and low marks are 15 mm and 40 mm from the tip.
The blade looks about 5 mm wide and the stopper is about 8mm in diameter.
Hope this Helps
Flying
You do not have the required permissions to view the files attached to this post.
-
Glenn
- Posts: 2826
- Joined: Tue May 10, 2011 2:23 am
- Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
- Location: Melb.
Re: g200w or g180w dipstick
I think so too Brett. When I put a DOHC in one of my cars I used part (3/4) of a Gemini sump.PR91 wrote:Try a Gemini stick. I think the rubber sleeve is the same size and the length should be close. A tape measure will confirm or deny.
But make sure it's the same style Gemini sump.... because they had a couple of different ones as well.
'72 PR60 Sport