g200w or g180w dipstick

Please be specific as to what part you're after - unless you're after a whole car for parts!
Post Reply
User avatar
Waldo
Posts: 194
Joined: Tue Oct 21, 2008 7:12 am
Car(s): 1968 Bellett GT
Location: Brisbane

g200w or g180w dipstick

Post by Waldo »

hey guys im after a g200w or g180w dipstick if anyone has one spare. thanks
PR91
Posts: 2521
Joined: Tue Sep 16, 2008 11:54 am

Re: g200w or g180w dipstick

Post by PR91 »

Depends on what sump and dip stick tube you have.... there were 2 or 3 different ones.
User avatar
Waldo
Posts: 194
Joined: Tue Oct 21, 2008 7:12 am
Car(s): 1968 Bellett GT
Location: Brisbane

Re: g200w or g180w dipstick

Post by Waldo »

I have this type sump. Or does anyone know what other dipstick would fit this sump? One i could cut down to suit that will just fit the tube
Attachments
72035986_472791059990869_3233260236651364352_n.jpg
72035986_472791059990869_3233260236651364352_n.jpg (49.39 KiB) Viewed 44068 times
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

Re: g200w or g180w dipstick

Post by flying »

Waldo
That sumps looks similar to mine
I will have a look tomorrow night

i do not have a spare but i will take a photo, measure it etc

Cheers Flying
PR91
Posts: 2521
Joined: Tue Sep 16, 2008 11:54 am

Re: g200w or g180w dipstick

Post by PR91 »

Try a Gemini stick. I think the rubber sleeve is the same size and the length should be close. A tape measure will confirm or deny.
But make sure it's the same style Gemini sump.... because they had a couple of different ones as well.
User avatar
flying
Posts: 259
Joined: Mon Nov 15, 2010 3:11 am
Car(s): 1967 GT Bellett
Location: Adelaide

Re: g200w or g180w dipstick

Post by flying »

Waldo

The Dipstick is 300 mm long from the tip of the stick to the inside base. The high and low marks are 15 mm and 40 mm from the tip.

The blade looks about 5 mm wide and the stopper is about 8mm in diameter.

Hope this Helps

Flying
Attachments
009.JPG
009.JPG (211.49 KiB) Viewed 43986 times
008.JPG
008.JPG (166.02 KiB) Viewed 43986 times
007.JPG
007.JPG (133.32 KiB) Viewed 43986 times
005.JPG
005.JPG (288.1 KiB) Viewed 43986 times
004.JPG
004.JPG (136.68 KiB) Viewed 43986 times
User avatar
Glenn
Posts: 2826
Joined: Tue May 10, 2011 2:23 am
Car(s): '72 Sport Bellett (imported 180912), M/B AMG A35, i30, had Belletts in past, 2 sed, 3 GT's.
Location: Melb.
Contact:

Re: g200w or g180w dipstick

Post by Glenn »

PR91 wrote:Try a Gemini stick. I think the rubber sleeve is the same size and the length should be close. A tape measure will confirm or deny.
But make sure it's the same style Gemini sump.... because they had a couple of different ones as well.
I think so too Brett. When I put a DOHC in one of my cars I used part (3/4) of a Gemini sump.
'72 PR60 Sport
Post Reply