Screamin' Squirrel II

[Teditor]

..After One Good Coat Of Stripper..

[Teditor]

...

[Teditor]

....

[Teditor]

.....

[Teditor]

......

[Teditor]

.......

[Teditor]

........After The Paint Stripper I Will Go Over All Of The Insides With Various Types Of Abrasives To Achieve The Bare Metal Result I Desire, Then & Only Then Will I Start Etch Priming & So Forth........

[Teditor]

.........After The Paint Stripping Most Of The Final Bare Metalin' Will Be With The Air Dremmal, I Have A Small Wire Brush Wheel Displayed Here, Others Such As What I Call (Carpet Disc's) Will Give A Far Better Result, Initially I Used The Wire Brush Wheel To Get The Inner Left Door To Bare-Metal Without Using Paint Stripper, So Methods Are Constantly Evolving.........

[Teditor]

..........The Two Front Guards Needing A Fair Bit Of Work To Get Them Both Up-To Par..........

[Teditor]

...........Tucked Away So The Next Item Can Be Started & Prepped...........

[Teditor]

............Dad Is Prepping For Fuel Tank Removal............

[Glenn]

very thorough work. Thanks for great pictures

glenn

[Teditor]

.The Various Ways Of Achieving The Desired Bare-Metal Results, I Now Opt For Paint-Stripper First Then The Rapid Strip Wheel & The Carpet Strip Discs For The Tight Spots, These Three Methods As I Have Found From Personal Experience Will Get The Results Desired & Then Some But Not Saying That This Is The Only Way, But A Way That Works For This Particular Application,
In The Picture Provided One Can See The Different Effects From The Various Products..

[Teditor]

.Inner Boot Preparation.

[Teditor]

..

[Teditor]

...

[Teditor]

....

[Teditor]

.....

[Teditor]

Michael is a bit concerned he might be swamping the site with photos, let us know if you tire of our musings!

[BULLITT]

keep em coming mate its good to see postings goes bit slow here at times ...cheers davo